Nowadays, people like to lay wooden floors when they are at home. This is not only very comfortable and beautiful, but also shows their own personality and taste. Therefore, they are very popular and liked by everyone, but how about the wooden floor ? Let me introduce in detail: how to lay the wooden floor and whether the wooden floor is paved horizontally or vertically? Let's take a look at the small series of the decoration home network! Xiaobian's article has been waiting for a long time!
How to lay a wooden floor
In order to ensure the effectiveness of the laying, you need to prepare in advance. First of all, everyone should clean up the construction site, remove the unrelated things, and clean up the garbage on the ground, including every corner. Then level the ground, the horizontal error can not exceed 2mm, if you exceed, you must find a way to level. If the ground is uneven, the feeling of the feet will not be good after the floor is laid. Then, the ground protrusions or uneven parts such as the edges and corners are trimmed.
How to lay two wooden floors
The wooden floor is easy to arch and deform after being in contact with the tide. In order to avoid this situation, everyone needs to carry out moisture-proof treatment on the ground. A common treatment is to place a moisture barrier on the ground to prevent the floor from getting wet. The moisture barrier should be flattened and the seams should be close together.
How to lay three wooden floors
Once the preparations are ready, you can start laying the floor. In order to make the effect of the floor paving more beautiful, it is best to pre-paste the floor and divide the part of the floor into two. It should be sawed according to the size. If the saw is more, the floor loss will be larger. Before the sawing of the floor, the floor can be completely opened, and the problematic or sloping floor can be selected for sawing, which can effectively utilize the partially problematic floor without excessive loss. Don't come up and take the floor to saw it, it will increase the loss. The location of the sawing floor must be selected in a place where the tiles are well-maintained and cleaned, otherwise the splashed wood ash will enter the place without any holes and it is difficult to clean.
How to lay the wooden floor
We all know that wood flooring has the natural property of thermal expansion and contraction. In order to avoid deformation caused by the extrusion between the floors, everyone needs to reserve expansion joints at the contact between the floor and the wall before laying the floor to avoid the floor from being drum. The size of the expansion joint is generally related to the expansion coefficient of the floor.
How to lay five wooden floors
After everything is ready, everyone can lay the floor. The common laying method is to lay a long board next to a short board. The reason why this is paved is to make the floor laying firm and not easy to loosen. After the floor is assembled, it must be tightened with tools. The next step is to connect, usually covered with floor beading. But it's also filled with glass glue, just look what you like. After the floor is laid, check it again and have an imperfect place to trim it. Then go to the last process. It is the installation of the baseboard, and the joints to be made are tight and flush. And to ensure that the floor wall seam can be pressed. The floor is paved and then the bead is installed. Generally, the floor is higher than the ground, and the high and low pressure strips are used. The floor is flat as the floor.
The above is the whole content of the wooden floor that Xiaobian brought to you. I believe that after reading this article, the small masters have a basic understanding of how to make the wooden floor. If you want to know more about the decoration consultation, please click Enter the decorative process section.
More related wonderful reading:
Solid wood floor keel price introduction, solid wood floor keel common sense introduction
What are the top ten brand rankings for wood flooring?
What is the difference between solid wood flooring and laminate flooring?
Solid wood flooring types explain the solid wood floor maintenance strategy
How to do solid wood floor maintenance? How to maintain the solid wood floor?
What is solid wood flooring? Which is good for solid wood flooring?
Gate For 3D Panel ,include single swing gates and double swing gates .generally they are made of square frame and 3D panel infill.
treatment surface :hot dip galvanized ,galvanized +epoxy coated to color RAL6005/RAL7016/RAL9005.
Accessories for single and double gate .include lock.hinge,gate stop,handle,etc.
Size or color other than mention above can be produced as per customer's request after confirmation.
Garden Fence Gate,Single Swing Gate For 2D,Double Swing Gate For 2D,Gate For 2D Panel
HeBei Fortune Trade Co.,Ltd. , https://www.gardfence.com