1. The LED runs dark for a while, which is caused by the excessive current flowing through the switching power supply lead. It can be checked whether the total current of the lead exceeds the current value of the switching power supply output. If so, replace the power leads.
2. The LED is very bright when it is powered on. After a period of time, it suddenly does not light up or the brightness is attenuated. It can be checked whether the switching power supply is 12V and the LED is misused to be 24V.
3. If there is no problem, check if the input voltage of the switching power supply is 220V. If the LED brightness is high or low: check whether the input voltage and output voltage of the switching power supply are normal. If the voltage is too high, it will cause the LED to burn out; if the voltage is low, it will cause the LED to not light or the brightness to decay. If the voltage of the user's location is very unstable, users may be advised to install a voltage regulator.
PTFE Guide Strip,PTFE Gland Packing,Expanded Tape
Tiangong PTFE & Plastic Material Development Co., Ltd. , http://www.sxptferod.com