Identify cabinet quality

With the popularity of the whole cabinet, people began to have a new understanding and requirements for the kitchen, then how to identify a set of cabinets

What are the advantages and disadvantages of the [1] of the Eurolod cabinet? The author reminds consumers to focus on the following aspects to ensure the overall performance of the cabinet:

1. Countertops. There are three types of countertops: quartz stone countertops, artificial stone countertops, and stainless steel countertops. Most of the market is quartz stone countertops. Because quartzite is hard, it should not be affected by thermal expansion and contraction.

2, the cabinet board. Check the cabinet plate, that is, view the panel of the cabinet from the section of the cut, whether it is a particleboard, a MDF or a moisture-proof board. If you are using a MDF, the quality will be worse.

3, the door panel. Identify the door panel. At present, there are many types of cabinet door panels on the market, such as fireproof panels, EGGER panels, baking varnish panels, etc., and different inspection standards for different decorative panels. Here are three commonly used detection methods: For the panel, check the edge sealing interface. If the sealing edge is not strong, the interface is “dog teeth”, the quality is not good; for the decorative panel without sealing, check the overall flatness, gloss, color, if the surface is uneven If there is no difference in gloss or color, the door quality is poor. In addition, the quality of the substrate used can be seen from the hinge hole of the door panel. If the substrate is a MDF, the quality is not good.

4, hardware accessories. Identify hardware accessories. Hardware accessories for cabinets are very important, preferably stainless steel hardware.

5, structural accessories. Identify structural accessories. The problem to be noted is: check the material of the connector for rust or insufficient strength. If you detect the hinge of the cabinet door, you can open and close the door several times, and also observe whether the position of the screw hole is hidden and in place.

6, cabinet technology and details. Dust-proof angle, anti-collision strip, foot line.

7, appearance. Whether the curve is slippery or not.

Rain Coat

Rain Coat,Rain Jacket,Safety Raincoat

Safety Vest,Reflective Material Co., Ltd. , http://www.chsafetyvest.com

Posted on