Experts: How to Paving Three-layer Parquet

Experts advise: how to paved three-tier parquet

According to reports, the suspended paving method adopted on the three-layer solid wood composite floor is easier to grasp. Many manufacturers provide paving training or matching paving services for dealers, ensuring the overall quality of the floor from the paving source. Suspended paving is a more economical and environmentally friendly paving method, in which the flooring is laid directly on the paved floor by means of the core force.

With regard to the three-layer solid wood floor suspension flotation method, no keel fixing is required under the floor, and the paving procedure is simple and fast. This not only saves money and paving time, but also prevents the keel quality or unqualified installation. upset. In addition, the glue between floors can be used without glue, so the floor is more environmentally friendly. The suspended paving method also has the functions of detachable, installable, movable and exchangeable. If the floor is accidentally damaged after being paved, it can be easily repaired and replaced.

After mastering the simple paving method for three-layer engineered wood flooring, many consumers may be inclined to shop by themselves. However, there are also professional requirements for the temperature and humidity of the room environment and the flatness of the floor when laying floors. Therefore, It is best for consumers to look for manufacturers' pavements and try their best to select the seller and the manufacturer as a company. This will ensure that if there is a problem with the floor, there will be no reciprocal responsibility, so that the floor quality and pavement effect Achieve double protection.

Home improvement clinic

Mr. Qi: In addition to paying attention to environmental protection, wear resistance, etc., I have heard that attention should be paid to notch and thickness. What are the effects of floor notches and thickness on floor quality?

Experts: The standard thickness of laminate flooring should be 8mm, but there are many 7.5mm floors on the market, and 7.5mm floors are mostly under-thick plates or along curved plates. Most of the curved plates are not well-dried. Or the stress problem is not solved, such a floor is of quality hidden dangers, its problems will be displayed after paving, manifested as arching, corrugated, etc., and the slot length is another way for manufacturers to cut corners, due to the floor area It is based on the width and length of the board, so the shorter the slot of the manufacturer, the wider its board will be. As a result, he virtually reduces the cost, and the floor slot is short, and it is easy to produce noise. Stepping on it will make a buzz.

Flooring purchase natural floor home improvement

Chain Link Mesh/Fence

Chain Link Mesh,Chain Link Fence,Chain Link Wire Mesh

Galvanized Steel Wire Co., Ltd. , http://www.nswiremesh.com

Posted on