Glufosinate and glyphosate are just a word difference, and if you don't carefully distinguish it, it's really unclear. Xiaobian today's summary of the difference between glufosinate and glyphosate is as follows, for your reference only, please correct me if you are not correct.
1, the mode of action is different
Glyphosate is a glycine, the mechanism of action - inhibition of enol acetone-based valerin phosphate synthase, protein synthesis is blocked; glyphosate is a systemic, broad-spectrum, herbicide , which is transmitted to the lower part of the ground through stems and leaves. The underground tissue of deep root weeds has a strong destructive power and can reach a depth that cannot be achieved by general agricultural machinery.
Glufosinate is a phosphonic acid, the mechanism of action - ammonium sulfate contact, inhibition of glutamine synthesis. Glufosinate is a phosphonic acid non-selective conductive herbicide. By inhibiting the action of glutamate synthetase, an important detoxifying enzyme in plants, the nitrogen metabolism in plants is disturbed, ammonium is excessively accumulated, and chloroplasts are disintegrated, thereby causing plant photosynthesis. Suppressed, eventually leading to weed death.
2, the conduction method is different
Glyphosate is a system of endocytic conduction;
Glufosinate is a semi-inhalation or a slow-moving, non-conducting contact.
3, the weeding effect is not the same
Glyphosate generally takes 7 to 10 days to work;
Glufosinate was once in 3 days (normal temperature).
From the aspects of weeding speed, weeding effect, controlling weed regeneration period, etc., glufosinate has excellent field performance. With the increasingly resistant weeds of glyphosate and paraquat, farmers will be due to glufosinate. Excellent resistance and good environmental performance are easy to accept. For tea gardens, farms, and green food bases that are more ecologically demanding, the demand for glufosinate is also growing.
4, the weeding range is different
Glyphosate has a protective effect on more than 160 weeds, including monocotyledonous and dicotyledonous, annual and perennial, herbaceous and shrub plants, but it is not ideal for some years of malignant weed control. For gravitational weeds such as goosegrass and small canopy, the effect of glyphosate is not obvious; glyphosate can not be used for crops with shallow roots or roots exposed such as coriander, pepper, grape, papaya, etc.;
Glufosinate is a broad-spectrum, contact-killing, non-residual, non-residual herbicide with a wide range of uses. Glufosinate can be used in all crops (as long as it is not sprayed onto the crop, it should be applied in the inter-row application). Or cover). Using weed stem and leaf directional spray treatment, it can be used for weed control of wide-planted fruit trees, row crops, vegetables and non-cultivated land; it can quickly kill more than 100 species of grasses and broadleaf weeds, especially Some of the malignant weeds that are tolerant to glyphosate, such as goosegrass, purslane, and small canopy, are very effective, and become the nemesis of grasses and broadleaf weeds.
5, different security performance
Glyphosate can be planted and transplanted 20 to 30 days after the general medicine; glyphosate is a herbicide herbicide. Improper use will bring safety hazards to crops, especially when it is used to control weeds or orchard weeds. Drifting, or not cleaning the spray equipment in time after use, as a result, when spraying other pesticides , spraying the pesticide containing residual glyphosate onto other crops, also causing phytotoxicity, especially on rice. Harmful, light can cause serious growth disorders caused by chlorosis of rice leaves, heavy ones die early, or not heading, or deformed ears.
The glufosinate can be planted and transplanted in 1-4 days. Glufosinate is low-toxic, safe, fast, environmentally friendly, and has a higher yield by topdressing. It has no effect on soil, crop roots and crops. It has a long-lasting effect and is suitable for weeding of all crops. It is easily degraded in soil and is safe for crops. Drift is more suitable for weeding in corn, rice, soybeans, tea gardens, orchards, etc. that cannot be completely avoided during sensitive periods or fog drift.
The Installation of Mounting Unit
1. Make the concrete base according to solution drawing, locate embedded bolts and set out strings by Laser Level to ensure the centers of embedded bolts in the same elevation as accurate as possible on vertical, horizontal direction and at end face.
2. Locate the Anchor Plate on the concrete base and adjust the position according to solution drawing(remove M14 washer,M14 spring washer,and M14 nut if they are connected to embedded bolts now),and then fasten M14 washer, M14 spring washer, and M14 nut with the tightening torque of 60N.m.
3.Take out the Hexagon Bolt Kit with Post B Corrugated Gasket M12x95 and remove its nut, spring washer, one washer, and corrugated gasket. Insert the Post A, B, C in to Anchor Plate according to the Hexagon Bolt Kit with Corrugated Gasket M12x95 drawing and then fix them by two sets of Hexagon Bolt Kit with Corrugated Gasket M12*95. Post C Post A
4.Remove the bolt kits M12*90 from all the Posts and Pre-Assembled Supports and unfold the embedded Supports, fasten them on the Posts by bolt kits M12*90 according to the drawing.
Installation of Rails
1.Please check the length of Beam before place it onto the Pre-Assembled Supports, otherwise extend it with Splice forBeam first. There are 4 self-tapping screws in each side and total 8 self- tapping screws in both sides. We strongly recommend NOT extend the Beams on Preassembled Supports.
2.Before locate the Beams, mark the position of the Beam son the surface of Pre-Assembled Supports with maker pens according to solution drawing for easier installation. Place the Beams on the 55*80 Tube of Pre-Assembled Supports and fix it with C Clamp Kits. Install all the Beams in the same step. The tightening torque will be 20N.m. C Clamp Kit Side Beam(Please arrange 3-4 persons to install when the array is long.)
Installation of Solar Panels
1.Place the panels above the Beam 85, fixing it with Wide End Clamp Kit in the side and Inter Clamp Kit in the middle. Install all the panels in the same steps until complete installation of al panels. Fasten all the bolts with tightening torque of 10N.m.
2.Complete installation, and please inspect and make sure all the bolts are fastened.
Solar Mounting System For Green House
Solar Panel Mounting Frames,Solar Panel Mounting Systems,Greenhouse Solar Mounting System,PV Mounting Systems
Hebei Honde Plastic & Metal Co., Ltd. , https://www.foundation-system.com