In the previous article, Xiao Bian introduced the related matters of rough room decoration, I believe everyone still has the impression. Decoration is a big deal, but the inspection room must not be ignored! What are the matters needing attention in the rough house inspection ? And listen to the decoration home decoration network Xiaobian Road!
1. When the rough house is inspected, the information prepared by the developer must be complete. Including "Residential Quality Assurance", "Residential Instruction Manual", "Completion Acceptance Record Form", area actual measurement table, pipeline distribution completion map.
2, the details of the site inspection should pay attention to:
a. Whether the installation of doors, windows and accessories is tight, whether the push-pull is smooth and unobstructed, and whether the surface of the door and window is scratched or deformed;
b. Whether the circuit is smooth, insulated and safe; whether the material is up to standard;
c. Perform leak test, drainage quality inspection and waterproof test of kitchen and toilet;
d. Water pipeline pressure test;
e. The wall and the ground should be level, and there should be no cracks, empty drums, bumps, etc., and if necessary, feedback to the developer for repair;
f. Take the level to measure the floor area, compare the previous area measurement data, the gap can not be too large;
g. Ventilation systems such as flue and exhaust ducts are exhausted smoothly, and there is no foreign matter blocked.
h. Whether the ceiling installation is firm, there is no loose place, if there is, it should be remedied or modified in time, otherwise there is a great potential safety hazard.
3. Check carefully whether the supporting facilities are made according to the requirements stipulated in the purchase contract.
5. When receiving the house, the developer must be required to give you the home inspection form when the house is inspected, and the form should have the signature and seal of both parties, otherwise you can refuse to sign. Because of this form, you will be able to use the form to find the developer to compensate for the loss and protect your legal rights.
The above is the related knowledge of the rough house inspection room introduced by the decoration home decoration network Xiaobian, I hope you can gain something after watching! Although the rough house is only a “first-time houseâ€, at the time of acceptance, the above five points regarding the inspection of the rough house still need to be noted. More exciting content, please also pay attention to our decoration encyclopedia section!
40W Glue Guns Features:
1. Versatile
2. Easy
3. Quick
4. Proective Nozzle Cover
5. Trigger Flow Control
6. Bonds instantly
7. High quality
8. High temperature or low temperature
9. New design
10. With switch function
11. Big power
12. Industrial use
Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc.Ideal for hobby and household repair,DIY&craft projects.
Designed and manufactured to the highest of standards to ensure a robust and long life, we hope it provides you with many years of trouble-free, safe and reliable service.
General Safety Information:
1. Check if the plug cord was in good condition, and if there is stand before plug into the electrical outlet ; Check if the used glue gun has glue flow through back of the tunnel;
2. wait 5-10 minutes to allow glue to soften, stand up the glue gun on the table when not in use;
3. Touch nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop the nozzle;
4. If the glue could not flow from the nozzle when the glue gun start to work, check if the glue gun are heating;
If glue gun can not be heated, there are following reasons:
1 Plug cord into electrical outlet not properly;
2 Glue gun has been destroyed owing to inner cord short circuit;
If glue gun can be heated, there are following reasons: Nozzle has been stopped by any impurity, ask careerman to manage it.
5. Do not use the glue gun under moist climate, humidity will affect insulation and cause electric shock;
6. Do not touch the nozzle or melted glue;
7. Do not remove out the melted glue stick from the tunnel back side, it will damaged the glue gun as well as scalding person hands.
8. Do not to disassemble or assemble any glue gun accessories freely, it will cause glue gun do not work properly;
9. Keep out of reach of children and stocked it beyond any of Children palpable side;
10. Only used for melting glue stick, no other usage;
11. When in use, there are any glue flow back from tunnel, stop using immediately, wait for careerman clean the glue;
12. Close the power if the glue gun not in use after 15 minutes;
Using methods
1. Glue gun using voltage is 110-220V AC,50/60Hz;
2. Tip gun forward on stand and place a piece of cardboard under the nozzle
3. Use 7-8mm (mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks through
tunnel at back of gun
4. After power, wait for 5-10 minutes to allow glue to soften
After glue softens, squeeze trigger to feed glue through glue barrel. Excessive force will damage glue gun. Put down nozzle after work, disconnect the power plugProfessional Glue Gun, 40W Glue Guns, Silicone Glue Gun, Hot Melt Glue Gun
Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com