**Safety Operation Rules for Sand Blasting Machines**
Sand blasting machines are among the most efficient and cost-effective tools used in modern industrial settings for surface preparation. They are widely employed for removing rust, scale, and other contaminants from metal surfaces, as well as for cleaning non-corrosive materials. Ensuring safe operation is crucial not only for the longevity of the equipment but also for the well-being of the operators and the surrounding environment.
Here are the essential safety procedures to follow when operating a sand blasting machine:
1. **Regular Maintenance Checks**: The air storage tank, pressure gauge, and safety valve should be inspected periodically. It's recommended to clean the gas tank every two weeks and check the sand tank filter once a month to ensure optimal performance.
2. **Ventilation and Sealing**: Before starting the process, make sure that the ventilation pipes and the machine door are properly sealed. Five minutes prior to beginning work, activate the dust extraction system. If this system fails, the machine must not be operated.
3. **Personal Protective Equipment (PPE)**: Always wear appropriate protective gear, such as gloves, goggles, and a respirator. Never operate the machine with exposed skin, especially arms, as the abrasive material can cause serious injury.
4. **Control Air Pressure**: Open the compressed air valve slowly to avoid sudden pressure surges. Ensure that the air pressure does not exceed 0.8 MPa, as excessive pressure can damage the machine or lead to accidents.
5. **Proper Abrasive Material**: Use sand particles that are suitable for the specific job. Typically, the particle size should range between 10 and 20 mesh, and the sand must remain dry to maintain efficiency and prevent clogging.
6. **Restricted Access During Operation**: Keep unauthorized personnel away from the work area while the machine is running. If any maintenance or adjustment is needed, always turn off the machine first.
7. **No Dust Blasting with Compressed Air**: Avoid using the sand blasting machine to blow dust with compressed air, as this can create hazardous airborne particles and increase health risks.
8. **Post-Operation Procedures**: After completing the task, let the ventilation and dust removal system run for an additional five minutes before shutting it down. This helps remove residual dust from the workspace and maintains a clean environment.
9. **Emergency Response**: In case of any personal injury or equipment failure, immediately secure the site and report the incident to the relevant department for further action.
By following these safety protocols, you can significantly reduce the risk of accidents and ensure a safer working environment. Proper training and consistent adherence to these rules are essential for all operators.
Source:
Image: 
Submission:
Submission: JIANGSU ARTSTYLE DECORATION MATERIALS CO..LTD , https://www.artstyledecor.com