The toilet is every day we have contact with daily necessities, remember Andy Lau also once sang a song called "toilet", then what kind of toilet is relatively more water-saving it? Below, the author will briefly introduce the water-saving situation of two types of toilets, the direct flush type and the siphon type.
Olussa bathroom
Straight flush and siphon type have advantages and disadvantages
The mandatory national standards for water-saving toilets have already been implemented, but while people are becoming more interested in water-saving, they are also skeptical about the flushing force of water-saving toilets. When someone was judging the toilet's momentum, he used table tennis as an experimental tool, that is, whether the toilet could be washed away by the table tennis ball as a measure of the impact of good or bad.
As the buoyancy of table tennis in the water is relatively large, with the general straight flush toilet experiments, all can not be washed down, can not get better results. The siphon-type toilet has a strong suction force due to the siphon effect of the water flow, and has an "attractiveness" for objects floating on the surface of the water with respect to the flush-type toilet. Therefore, the effect of the experiment is good.
But can this show that the siphonic toilet flushes against the stolen goods better than a flush-type toilet? As another simple example, if a wet rag is thrown into the toilet, the flush toilet will definitely be more outstanding than the siphonic toilet.
Experts say that siphonic toilets are easy to flush away dirt that adheres to the surface of toilets, while straight flush toilets have larger diameters and are more likely to wash away larger dirt. They all have advantages and disadvantages, and they must be comprehensively considered when purchasing.
1, seek a balance between water conservation and clean-up rate
Because of the focus on the topic of water conservation, people have created a new problem: In the end, whether it is straight-through or siphon-type water saving under the premise of ensuring momentum?
Whether or not a toilet is water-saving depends on two aspects. One is a water tank and the other is a sitting bucket. The difference between the sitting bucket and the siphon is also the difference. Straight flush type, characterized by simple flushing pipeline, short path, and thick diameter, generally with a diameter of 90 to 100 cm, can easily wash away the dirt by using the gravitational acceleration of water.
The siphon-type pipe is very tall and long and thin, because the smaller the pipe diameter, the more obvious the effect of siphoning and the greater the pumping force. However, the demand for water is inevitably high. People who install siphonic toilets at home will find that when flushing, they must first discharge water to very high water levels, and then the dirt can go down with water. Its design structure determines that a certain amount of water must be available. In order to reach the level of cleansing, at least 8 liters or 9 liters of water should be used. If the forced reduction in flush volume is 3/6 litres, the flush rate will be insufficient. There are some consumers on the market that reflect that 3/6 litre toilets are not clean, which is the reason.
Toilets are to be coordinated. If only a water-saving water tank is used, but it is a bucket with a large amount of water, it is difficult to achieve real water saving.
2, the pipeline area determines whether it is easy to block
The key to the water-saving performance of the toilet lies in the coordinated design and installation of the entire flushing system. In the past, the reason why the flushing amount of toilets was not controlled was mainly due to the fact that the toilets were assembled in parts and the water saving performance of various parts could not be harmonized and unified. There are fewer varieties of flush toilets on the market. The performance of such toilets is better than that of siphons. However, these types of molds by domestic manufacturers are relatively few, and this situation has only appeared in the market. Moreover, there is no return bend in the design of this toilet, and straight flush is adopted, which is not easy to cause clogging in the flushing process compared with the siphon type.
The siphon-type pipe diameter is also about 56 cm, which is equivalent to three times that of the straight flush type, so it is very easy to block it when flushing. Some people joked that families who install siphonic toilets must have two pieces of equipment: paper baskets and tweezers. Because the toilet paper is thrown directly in the toilet, it is easy to block and the work will naturally be done with the blind.
Sanitary ware purchase villa design Yu bathroom toilet room bathroom design leaking toilet
Chemicals,Travel Products Co., Ltd. , http://www.nschemicalindustry.com