Sanitary companies focus on improving the technical quality of water-saving products to be improved

It is understood that toilets currently on the market are mainly double-filed toilets. The water level standard for toilets in the category 2 (water-saving evaluation value) stipulates that the maximum water consumption of double-seat toilets cannot exceed 5.0 liters. At 3.5 liters, many companies have met the requirements for large-scale water consumption, but there are still problems with the small-scale water consumption. Because the key to saving water in toilets lies in the design of pipelines, it is necessary to ensure that siphons can be generated at the instant of flushing. Since there is less water consumption in small stalls, if the pipeline design is unreasonable, a large amount of water must be used to fill the pipelines. It is difficult to use them. When a siphon is generated, even if a siphon can be generated, its stability is difficult to guarantee. Many companies have spared no effort to focus on R&D for water-saving technologies after achieving water efficiency standards. For example, under the premise of guaranteeing the effect of flushing, the company expanded the pipeline to increase the pipeline from the national standard of 41 mm to 43 mm and even to 45. Mm.

“In the past, the industry standard was mainly based on GB6952. The water consumption of water-saving products was controlled within 6 liters. After the water efficiency standard for toilets of CB2552-2010 was introduced, the water-saving indicator was raised from 6 liters to 5 liters. There is no impact, because we designed the water-saving products more than the standard requirements, GB6952 requirements for water-saving products is to use less than 6 liters of water, we issued a design indicator is controlled within 5 liters Some products are controlled within 4.8 liters. Now all of our products are able to meet the requirements of Level 3 of water efficiency standards. Some products can meet Level 2 requirements. Overall, our product water consumption is in Level 2 of the Water Efficiency Standard. Between Class 3 and Class 3, we are able to ensure the flushing effect.We are fully in charge of product testing, and each product must be tested prior to shipment, including testing its water consumption, cleaning function, and discharge function. Our main products have not received any complaints about excessive water consumption or plugging in the market, said Qi Shenghua, vice president of Guangdong Ou Lejia Kitchen & Bath Co., Ltd.

After many years of development, Chaozhou Sanitary Ware Enterprise has a good tradition in production technology. The research and development of water-saving technologies by enterprises is very early. In particular, after the National Sanitary Ceramics Mould Research & Development Center settled in Chaozhou, the development of water-saving technologies for sanitary ware products has been promoted. . It is understood that there are many sanitary ware companies in Chaozhou that can produce water for toilets that meet the requirements of Level 3 of water efficiency standards, control water consumption within 5 liters and guarantee flushing effect, such as Ou Lejia sanitary ware and Connor sanitary ware. , Ya Tao bathroom and so on. As the development of toilet water-saving technology is relatively mature, most companies are not worried about negative impact on the introduction of mandatory national standards for toilet water efficiency.

“We have always attached great importance to the research and development of toilet water-saving technology. It is one of the earliest companies in the industry to develop water-saving technology. We started to research and develop water-saving products when the old national standard was still 13 liters of water. Our products have all been used in water consumption. To achieve the water saving standard, according to the requirements of the water efficiency standards, at present, 60% of the products can meet the secondary requirements of the water efficiency standards in terms of water consumption, and ensure the flushing effect of the products, and all products can meet the requirements of the third level. For water conservation, we only use it as a company's responsibility and mission in R&D. We do not emphasize that the more products are water-saving, the better. After the introduction of water efficiency standards, we will strictly follow its requirements. The water efficiency logo has been designed. , will be based on product testing requirements affixed with the corresponding logo." Conner sales director, said Chun Chun slip.

From the point of view of the enterprise, it is naturally a good thing to devote itself to the production of water-saving products, but it is better to go through the process of technology. Otherwise, it will be easily damaged or washed, but it will waste more water. It is good for the consumer to be able to achieve high quality and low price, but if the price of water-saving sanitary ware products is too low, one must keep an eye on them so as not to buy poor quality water-saving products.