Required materials: Sponge, rags, plastic bags. Tools needed: rollers, brushes, lacquer plates, cleaning cloths, sponges, rags, plastic bags. Let the walls add color You can also add some imagination, change the appearance of the wall, just use a piece of cloth, sponge, plastic bag, or just another batch of soil can create another spring of the wall Oh! All kinds of printing methods Live coverage Method is A very simple creative painting method, not necessarily an expert, do not have to search for too many tools, because the tools needed are awe-inspiring. Sponge, rags, and plastic bags are things that the family hands down and quickly learns from it. Show your personal taste. When you have a visitor at home, you can also make a big show. The topic continues!
A. Sponge printing method
First use a roller or brush to paint the wall with a layer of background color. Sponge before soaking, and then use a brush to apply different coatings on the sponge, or directly to the sponge stained with paint, can be exercised on paper first, feel feasible, the wall is still brushing inward Each painting is mainly based on a 60 cm wide wall.
B. Sponge to paint
With an irregular surface and a soft tissue structure, it is the ideal sponge. Paint the primer on the wall before the paint. When the paint is applied to the area of ​​200X100cm, it will not be dried when the sponge effect is produced. Soak the sponge with pine perfume, squeeze it, and then start to touch the wall to remove the paint. The more you lose, the more effective it will be.
C. rag method
Any kind of fabric can be used. The more wrinkled fabric, the more visible the pattern effect. The operation mode of the rag, no matter whether it is rolling or tapping, will affect the final rendering effect.
step:
1. Apply a layer of paint first and make sure the primer is dry and clean.
2. Cut a piece of rag, the size is enough for the palm of your hand to use, and can cut the same size of rag for a backup.
3. Apply the rag to the paint and remove excess paint. The pattern must be clear and obvious. Otherwise, the paint is too much.
4. Apply the walls rhythmically to ensure that the pattern shows evenness and irregularity.
5. If the pattern is lighter, re-soak the rag. If the cloth is completely wet, change the cloth immediately. A wall should be completed at the same time to avoid uneven patterns.
D. Plastic bag printing method
The first layer of background color, each time the paint to 200cm square units, plastic bags rolled out of the pattern, this method can produce rough lines.
Wall construction paint
Rubber Seal Strip Co., Ltd. , http://www.nsrubberseal.com