>>> Link: Checking whether the cork floor is smooth should pay attention to four aspects
First, clean the ground before installation and construction, so that the ground level and clean.
Second, the floor keel must use dry wood, moisture content below 17%, after the construction of the keel must be planed the same, with a horizontal line uniform keel height, or in the future due to the role of pressure, will produce free cracks between the floor.
Third, if the ground environment is humid, it is necessary to conduct moisture treatment, while the back of the floor is coated with a layer of moisture-proof protective paint, in particular, the back side of the floor and the kitchen and the bathroom should be painted and protected against moisture. The new residential ground should be painted with moisture-proof paint for moisture isolation.
Fourth, avoid using cement fixed keel, in order to avoid moisture deformation of the floor, such as cement has been sealed, the paint can be used to seal the keel.
5. It is advisable to leave a space of about 1 cm around the wall when constructing the floor to take advantage of the floor expansion caused by climate change.
Sixth, the interface between the floor and the floor can not be glued, must be nailed with a floor nail from the opening 45 degrees on the keel.
7. After the floor is assembled, it must be coated on the same day with a sealing primer to protect it. If it is left for too long, the unpainted floor is susceptible to dampness or drying out. Once it is contaminated, it is difficult to clean.
8. It is forbidden to expose to strong sunlight when near windows or near balconies, so as not to change the floor due to exposure.
Ground acceptance experience on cement concrete window space residential toilet partition
Expansion Joint,Wosd Expansion Joint,Aluminium Expansion Joint
Flooring Accessories,Stair Parts Co., Ltd. , http://www.chaluminumprofile.com