Aluminium plastic panel is a kind of indoor and outdoor new decorative materials that have just emerged in the country. At present, there are many brands on the market, and there are many mixed products and the quality of products is uneven. Because of its special structure, consumers are generally hard to discern the intrinsic quality of products. It is our responsibility to remind consumers to pay attention to the following identification methods when purchasing and using aluminum-plastic panels:
See whether the aluminum-plastic panel has a smooth surface, no ripples, bubbles, splashes, and scratches.
Measure whether the aluminum plastic board meets the international requirements, the inner wall board 3mm, the outer wall board 4mm.
A corner of the aluminum-plastic panel is broken, not easy to break PE material or doping makes false.
The intermediate material of the aluminum-plastic composite plate is burned, and the true PE is completely combusted. Doping causes false impurities after burning.
When the router is bent, see if the front is broken.
The butanone was used to identify the fluorocarbon coating on the outer wall board. The xylene was used to identify the inner wall board coating. After 5 minutes, the reagent was wiped off to see if the bottom was exposed.
Ask for the manufacturer's quality inspection report, warranty book, ISO-9002 international quality certification, and have these manufacturers are regular manufacturers, can guarantee product quality, the same price than quality, the same quality than price.
See whether the aluminum-plastic panel has a smooth surface, no ripples, bubbles, splashes, and scratches.
Measure whether the aluminum plastic board meets the international requirements, the inner wall board 3mm, the outer wall board 4mm.
A corner of the aluminum-plastic panel is broken, not easy to break PE material or doping makes false.
The intermediate material of the aluminum-plastic composite plate is burned, and the true PE is completely combusted. Doping causes false impurities after burning.
When the router is bent, see if the front is broken.
The butanone was used to identify the fluorocarbon coating on the outer wall board. The xylene was used to identify the inner wall board coating. After 5 minutes, the reagent was wiped off to see if the bottom was exposed.
Ask for the manufacturer's quality inspection report, warranty book, ISO-9002 international quality certification, and have these manufacturers are regular manufacturers, can guarantee product quality, the same price than quality, the same quality than price.
Nanjing Great Century Art Model Co., Ltd. , , https://www.dsjysmx.com