It is not uncommon to incorporate a cloakroom design into the current design. However, how to arrange the specific cloakroom is a trouble. Customized coat needs to be considered among many factors: the size of such cloakroom, clothes rail height, depth wardrobe, shoe closet inside. There are also custom cloakrooms to pay attention to? Next, follow the decoration home network Xiaobian to learn about the relevant content!
First, the size of the cloakroom
The outer dimensions of the cloakroom are the size of the cloakroom. This is mainly determined by the size of the home space. Generally, the family room is slightly larger, the small room is 8-12 m2, the large room is 14-18 m2, and the floor height is 2.5-2.8m. The size of the cloakroom is generally 2000mm, 2200mm, 2400mm. , 2600mm, 3200mm, 3800mm, 4200mm and other width specifications, 300mm, 450mm, 500mm, 550mm, 600mm and other depth specifications.
1, the height of the clothes rail. The height of the mounted clothes rail can be divided into 170 cm, 130 cm and 90 cm, which are used for hanging long coats, short tops and long pants.
2, the depth of the wardrobe. Mainly considering the shoulder width factor of the person, generally should not be less than 500mm, we can set it to 600mm, otherwise it will only close the door when it is inclined. Hahaha, of course, can not be slanted, oblique hanging will take up space, not practical, the conventional will not be designed this way.
3. Shoe cabinet in the cloakroom. The space required for each pair of shoes is approximately 20 cm wide, 15 cm high and 30 cm deep. The height of the low boots is higher than 30 cm, while the height of the high boots needs to be higher than 50 cm. It is best to reserve more space. In addition to the shoe cabinet, the bottom of the wardrobe can also be provided with a shoe rack. If the floor height is relatively low, it can be used to place low-heeled shoes or flat-bottomed scoop shoes that women often wear.
Second, matters needing attention
1, hardware: directly related to the service life of the cloakroom, can not be sloppy or cheap to use the poor quality, the endless troubles.
2, reserved size: between the cloakroom and the wall need to reserve a margin of at least 5cm, easy to install, but this designer will generally pay attention, we will know.
3, consider the environment: the location of the cloakroom may be next to the kitchen, the bathroom, it is necessary to test more need to prevent moisture, dehumidification.
4, increase the function: For example, the customary ironing can increase the shelf embedded in the ironing board and the iron, the small space can be installed on the wardrobe door with a rotatable mirror, whether it is necessary to open space for outdoor/extreme sports and many more.
The above is a detailed answer to the Xiaobian, I don't know if you are satisfied with the introduction of the decoration home network Xiaobian~ If you want to know more about the exciting content, please continue to pay attention to our decoration encyclopedia!
More related wonderful reading:
What are the custom cloakrooms? Custom cloakroom design considerations
Design cloakroom design points, custom cloakroom steps
Brush,Car Brush,Soft Car Wash Brush,Professional Car Wash Brush
Foshan SUMEITE Grinding Technology Co.,Ltd , https://www.aedetail.com