As a general-purpose equipment, the German AERZEN Roots blower has been continuously upgraded in China in recent years. As the Roots blower becomes more popular, more and more problems are emerging.
As a general-purpose equipment, the German AERZEN Roots blower has been continuously upgraded in China in recent years. As the Roots blower becomes more popular, more and more problems are emerging. How to extend the service life of Roots blowers has become the most concerned issue in various fields. In order to extend the life of a Roots blower, proper use and daily maintenance are very important.
Proper use and daily maintenance not only avoid the safety hazards that arise during use, but also ensure that the fan does not strike without cause. If you do not use a Roots blower for a long time, cut off all the power supplies on the body and place them in a ventilated and dry place. This will effectively avoid the rust caused by the body in the long-term non-use. At the same time, it is necessary to regularly oil the Roots blower during use, in order to maximize the flexibility of the Roots blower.
In addition, the following points should be noted during the usual use:
1. Regularly overhaul it. There are many screws on the body of the Roots blower. These screws will have some looseness during long-term use. At this time, the personnel need to perform necessary maintenance on them to eliminate safety hazards in time. Guarantee the normal use of the three-leaf Roots blower and the service life.
2. The blades on the Roots blower are the parts that are more prone to problems on the whole body. Therefore, during the use of the three-lobe Roots blower, the blades should be regularly inspected and maintained. If the blades are found to be noisy. In the case of large or abnormal rotation, it is necessary to find a professional to inspect the fan in time to avoid the failure of the whole body due to the damage of the blade.
3. When disassembling the machine, measure the matching dimensions of the machine, make a record, and mark and direction on the parts to ensure the assembly and maintain the original matching requirements.
4. The overload of the Roots blower is sometimes not immediately displayed, so pay attention to the intake and exhaust pressure, bearing temperature and motor power "target=_blank> electromechanical changes, in order to determine whether the machine is operating normally.
5. The unit must be replaced for 1000 hours under normal conditions. Pay attention to the normal cooling of the lubricating oil, pay attention to the quality of the lubricating oil, and always listen to the operation of the Roots blower, and pay attention to whether the unit is working under the specified working conditions.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Light Weight Apvc Roof Sheet,Carbon Fiber Upvc Roof Sheet,Color Coated Temple Roof Tile,Color Corrugated Plastic Roofing Sheet
ZHENHAO BUILDING MATERIALS CO.,LTD , https://www.zhpvctile.com