Home decoration common plate selection three magic

The materials that are most used in home decoration and have the most varied uses are the plates. Floors, door panels, furniture, beds, walls, and wooden ceilings are all made of plates. In particular, products made on site by carpenters have certain requirements on the quality of the plates. In the home improvement process, although a lot of situations are that the decoration company helps us to prepare the plates, as a savvy consumer, we carefully check the quality of the plates to be able to better handle the home decoration.

Wood board directly affects the quality of decoration

It is understood that, according to regional characteristics and the use of habits, Chengdu area will be used to decorate and decorate wood panels, wood panels have become the home of wood for the "big", its impact on the quality of decoration is very direct. According to industry insiders, blockboard is also called “big core board”. It is made by drying the wood into equal length and width, and is made by machine assembly, hot and cold pressing, and polishing. The qualified wood board has no seams and high strength. The adhesive generally uses low-formaldehyde glue or formaldehyde-free glue that is harmless to the human body. The blockboard has good grip strength, high strength, hard texture, and sound-absorbing and heat-insulating effects. The moisture content of this board is 10%~13%, which is convenient for processing and it is deeply loved by consumers. Because of its smooth surface, not easily deformed, it is mostly used for furniture, doors and windows, partitions, false walls, curtain boxes, etc.

Low-priced wood board may be of low quality

In the selection of wood board, we can first make preliminary judgments from the price. It is understood that the current price of wood board market is usually 150 yuan / piece or more, up to three or four hundred dollars, and some poor wood board market price is only tens of dollars. Low-grade wood board generally uses recycled wood, moldy old materials, and wormholes, nails, and other recyclable materials. There are problems such as insufficient drying, uneven molding lines, large gaps, poor adhesion, and excessive formaldehyde content. Because it is difficult for consumers to look at the quality of wood boards from the outside, many small workshops use the method of filling putty to treat the surface of the board very flat, so that consumers are not aware of it. According to experts in the industry, the biggest problem in using this type of inferior wood board in decoration is not only that it may cause excessive formaldehyde, but also because old, decadent, poorly-insulated wood boards have too large gaps and insufficient tightness. There is no misalignment staggered, the use of non-standard or short wood, resulting in greatly reduced compressive strength, there will be deformation, fracture and other phenomena during use, seriously affecting the consumer's use of results and use of safety. In order to save the cost of some wood board, the surface layer uses a very thin blank, which reduces the quality and affects the decoration effect and use.

In addition to the price, the most easily determined factor, consumers can first look at the flatness of the sheet surface, if there is no warping, deformation, bubbles, depressions are better. Secondly, since the board contains wood strips, it is necessary to see if the arrangement of the core strips is even and orderly, the gap is small, and the core strips are free from rot, cracks, wormholes and knots. You can also pick up the corner of the plate and shake it. If you make a sound, it means that there is a large gap between the bars, which will affect the nail holding force.

(For more information on plate, please pay attention to China Plate Trading Network /)



T-slot Cutters

T-Slot Cutters,T-Slot End Mill Milling Cutter,6Flutes T-Slot End Mill,T-Slot Milling Cutter

Supal(changzhou)Precision Tools Co.,Ltd , https://www.endmillpro.com

Posted on