Physicists in Austria, the United States, and Germany recently proposed a new type of photovoltaic cell. The design of the battery was based on the discovery 10 years ago that the interface of the two insulating oxides could be changed to a metal substance, which may make the photovoltaic cell no longer require a metal wire. If the cost of manufacturing the oxide layered structure can be reduced, then this research may give birth to a new type of high-efficiency photovoltaic cell.
In 2004, physicists Harold Hwang and Akira Ohtomo made a major discovery. When the insulator barium titanate was grown in another insulator barium titanate, the 2D electron-gas combination could generate metal substances. This phenomenon is caused when the polar oxide meets another non-polar oxide and causes charge accumulation.
Conductive interface
A team of researchers from the Vienna University of Technology, the Oak Ridge National Laboratory and the University of Wurzburg have calculated the calculations and proposed using this effect to create a completely new type of photovoltaic cell - - Conduction of current through the conductive interface, not metal wires.
The remoteness of the photovoltaic cell is a "photovoltaic effect", which refers to a potential difference between different parts of the non-uniform semiconductor or semiconductor combined with the metal caused by light irradiation. It is firstly a process in which photons (light waves) are converted into electrons and light energy is converted into electric energy. Second, it is the process of voltage formation.
Satoshi Okamoto of the Oak Ridge National Laboratory and his colleagues concluded that this may help separate electrons and holes from each other before they bind. If the polar oxide is combined with a suitable non-polar oxide, the interface becomes a metal. Therefore, electrons and holes can be derived from either end without the need for wires on the surface.
Absorbance maximized
First polar oxides need to absorb as much solar energy as possible. The band gap of a substance is the difference between the valence and the energy of the conduction band certificate. Photons below the band gap cannot create electron-hole pairs, while photons with energy larger than the band gap can create electron-hole pairs. However, the latter exceeds the bandgap electrical energy will be lost with the heat. Therefore, the bandgap is low enough to absorb large amounts of photons.
Therefore, the researchers "picked" yttrium vanadate with a band gap of 1.1 eV - visible band gap between 1.5-3.5 eV. They used density functional theory to establish a model of a bismuth vanadate photovoltaic cell grown on a barium titanate substrate. Although they can't make accurate predictions about power generation efficiency, researchers say that this inherent advantage merits further study.
Optimistic and cautious
Is the efficiency of this photovoltaic cell economically viable? Okamoto is optimistic and cautious about this. In his opinion, this may be very competitive, but it will take a long time. I hope that when people fully realize the advantages of this photovoltaic cell, its cost will drop.
Neil Greenham from Cambridge University who is committed to the development of innovative photovoltaic cells described the research results published in Physical Review Express as "an interesting paper," but he stressed that whether the battery can surpass the current technology remains to be seen. The birth of a product prototype.
Now that you know why having the best LED Hydroponic Light is the most effective way of growing plants indoors, it is important to know what exactly you should be looking for in a model before purchasing it. Even though LED Grow Lights overall consume less power, provide more useful light, and give off less heat, there are still poor models that wouldn't give you everything that you are looking for in a set up. By taking a look at a few things, though, you'll be capable of having the best harvests ever and making sure you are saving money and able to truly enjoy the fruits of your labor.
LED Grow tube light uses the new light spectrum optimized horticulture SMD LEDs for higher yields and lower operating costs compared to standard horticultural T8 and T5 fluorescent light fixtures.Ideal lighting for Micro greens, lettuce and seedlings, the low profile light tube allows for a great utilization of growing space while reducing the cost and maintenance of LED drivers.
How to Select the Best Grow Light for your Greenhouse?
The plant needs light to thrive cause the light is essental for photosynthesis.without it,plants can not make food.but light can also be too intense,too hot or last too long for growing healthy plants.plant growth accelerates with abundant light because more of the plant`s leaves have exposure,which means more photosynthesis.in the winter,days are not long enough,but many plants still need 12 hours or more of light per day.
Now,adding led grow lights to your greenhouse is an nice choice if you live in the north, and can not get enough daylight in winter.you might be take HID into consideration,cause it has high output and cover a wide area.but now,we providing you some dfferent.the newest type of grow lights use LED technology.
Provides Maximum Light Density and optimizing spectrum(410nm-740nm,white)
as we know that the plants need more light from the blue side of the spectrum during their seedling stage and when developing foliage and require light from the orange to red side of the spectrum while inblooming and fruiting phases. We adopting lastest intergrated COB technology, white , more red and blue PAR(410-740nm) per Watt than any other lighting fixture for the best color uniformity.
Dual Veg and Bloom for plant growth and bloom
the Led grow lights feature selectable VEG and BLOOM light spectrums to deliver maximum performance from seeding through the flower stage and finally harvest.
Increase yields and potency
using high quality lense that hyper-focus the lights on your canopy.the photons are beamed directly to the plants.this gives growers the ability to get greatest possible crop yield.
Reduce your costs with energy efficiency
energy-efficient cannabis grow lights cost between 40%-60% less to operate compared to HID lam year.
Led grow light also eliminate the needs for ballasts and reflectors while they minimize the cooling systems,accelerating your payback.you will see the electrical bills trimmed by approximately half,year after year.
Installs and operates simply
the input voltage is AC100V-240V,fit for the world standard,built-in power supply.do not need other equipment,just access to the Plug,the lamp will be work smoothly. The led grow lighting is small size,just few inches and easy to install.it is the good option for some greenhouse.
Long lifespan
using built-in quiet fans and the shutter in the wind,induced draftfrom all sides.runs with quiet. Useadvanced isolation power supply and soft start protection technology, to prevent the high voltage when turn on the light from damagingthe lamp body.
Latest Diamond Version LED Grow Light for plants,using effective full spectrum 360-870nm sunlight spectrum for plants,largely accelerate the plant growth.Compare with the previous led grow lights,Diamond LED Grow Light use high par value and high lumen ligthing for the plant growth.Solid lamp body can last for long time.It can be used to enhance the growth of different plants (medical plants, vegetables, herbs and flowers ).Widely used in hydroponic,greenhouse, indoor garden, horticulture, aeroponics.It is suitable for all plants growth.
Usage Instruction:
Extremely bright,do not look directly at the LED grow light when the light is working.
Indoor use only,not water-proof.no extra ballast is needed.
This light includes IR(infrared)LEDs which look dim/invisible,they are not faulty LEDs.
Timer controls both channels on/off together.cannot turn VEG and BLOOM channels on/off separately.
Led Hydroponics Light,Led Dual Band Light,Hydroponics Dual Band Light,Hydroponic Led Grow Light
Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumlight.com