The decoration of the bathroom surface is relatively simple, but the water pipes in the bathroom wall are arranged, and the design of the water-repellent layer is very important. Once the toilet leaks, the neighborhood relationship is in jeopardy, and the water-filled Jinshan furniture is at stake. Then how to remedy the leakage of the bathroom, the experts should at least support the professional to come before the disaster area is too spread, see the experts to share the small coup, learn to earn.
There are many drainage pipes in the bathroom, and the ground is waterproof, non-slip, and the roof is very moisture-proof. How to remedy the leakage and seepage of the bathroom?
1. Leakage of the waterproof layer, the performance is that after taking a bath or the ground water, the water leakage downstairs is serious, and the performance downstairs may be one place, or may be multiple places. The method of judging is very simple, blocking the floor drain, and then releasing the water on the ground. After forty minutes, pay attention to the situation of water leakage under the building. If the water leakage is serious under the building, it is determined that the waterproof layer is leaking.
This situation can be repaired by using water repellent, caulking paste and plastic steel. That is to make the surface of the bathroom waterproof again, without the need to plan the tiles, saving time and cost.
2. The water pipe leaks, which is displayed around the sewer pipe, and there is a serious dripping phenomenon. The way of judging is to leak to the ground, the hand basin, the water in the basin, and the toilet to repeatedly flush the water. If the water leakage in the downstairs is aggravated, the water pipe leaks.
In this case, look for repairs and replace the down pipes, and try to plan as much as possible. Then you need to be waterproofed on the ground, no need to fully plan the bricks. Waterproofing of the bathroom surface can be done with 100 million waterproof products.
3. The water inlet pipe leaks. If the water leakage is even and continuous, the water will be closed and the water will be reduced and not leaked. It means that the water pipe is broken.
This kind of situation can be solved by replacing the tube, without using a planing brick, or by judging the leak point and changing the tube.
How to prevent leakage and water seepage in the bathroom during the renovation period? Experts in the industry have pointed out the trick of the “three defenses†project in the bathroom.
1. Top moisture blocking treatment
The water in the bathroom is relatively large. At present, the general building is integrated with the bathroom and the bathroom, so the bathroom is often surrounded by water vapor, so the moisture protection of the roof is very important. To make the bathroom roof waterproof, it is best to apply a layer of water glass on the roof, and then use a PVC gusset with better waterproof performance. The gusset can be mounted on the keel and can also serve as a conduit.
2. Try not to damage the original waterproof layer
When the new building is delivered for use, the bathroom is generally waterproofed, but most of the people's decoration will be paved with floor tiles, leveling the floor, and re-arranging the water and sewage pipelines. This will destroy the original waterproof layer of the bathroom, so the waterproof layer of the bathroom is re-established. Be sure to redo the waterproof when decorating. First use the cement mortar to level the ground, then do waterproof treatment, first clean the floor, and then repeatedly paint with polyurethane (water glass) waterproof coating 2 to 3 times.
The joint between the wall and the ground and the ground joint between the water and the water are the most likely to leak. It is necessary to urge the workers to handle these corners and the waterproof coating must be applied. Require the decoration team to do the cement roots for the upper and lower pipes of the kitchen and bathroom. Brush the 10 to 20 cm polyurethane waterproof coating from the ground, and then re-do the polyurethane waterproof to enhance the waterproof.
3. "Leak test" test waterproof
After the waterproofing project is completed, seal the door and the water outlet, fill the bathroom floor with water to reach a certain liquid level, and make a mark. If there is no obvious drop in the liquid level within 24 hours, the roof of the house downstairs does not occur. Leakage, waterproofing is qualified. If the acceptance is unqualified, the waterproof project must be redone and re-inspected.
Don't neglect this link. Many unprofessional decoration parties finish the glass glue, so that once the water leaks afterwards, it is too late to remedy. Therefore, the waterproof experiment must be done. After confirming that there is no leakage point, lay the floor tiles again.
The bathroom often has water. It is easy to slip on it. The Mavericks decorate the friendship reminder. It is best to use anti-slip floor tiles with raised patterns. This floor tile not only has good waterproof performance, but even in the case of water. It won't be too slippery. At the same time, the ground should be slightly inclined to the ground drain to facilitate flushing.
Komatsu Filter,Komatsu Fuel Filter,Komatsu Excavator Filter,Komatsu Genuine Filter
JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.stszcmparts.com