The industrial dehumidifier is mainly used in production and office places where the ambient air humidity is high. It can control the relative humidity of the environment within the specified range to meet the production conditions and improve the one-time pass rate of the product. Currently, the dehumidifier is widely used. In textiles, cigarettes, telecommunications rooms, microelectronics rooms, etc., where the environmental humidity requirements are high, the industrial dehumidifiers must be stable and stable in terms of work efficiency and performance. Therefore, it is necessary to pay attention to the installation points during the installation process. .
The main installation points of industrial dehumidifiers are:
1. The outdoor air inlet of the dehumidifier should be avoided as far as possible in the same direction as the regeneration air discharge port. If it is unavoidable, effective measures to prevent air shorts should be taken.
2. The ambient temperature of the installation dehumidifier should be higher than the dew point temperature of the treated air. If it cannot be guaranteed, the air duct of the treated air should be insulated to prevent condensation and damage to the runner.
3, the discharge pipe of the air after birth, the length should not be too long, and should be insulated.
4. The discharge pipe of the air after birth should have a slope of not less than 2 ,, and the slope should be toward the exit direction.
5. The air duct of the raw system shall be made of heat-resistant, moisture-resistant, non-combustible or flame-retardant materials.
Concerned about surprises
Label: What are the main points for installation of industrial dehumidifiers?
Previous: What are the differences between stone carvings in Chinese and Western countries? Next: What is the trend of ceiling matching?
Expanded Metal Mesh,Expanded Metal Mesh Sheets,Mesh Expanded Metal,Black Expanded Metal Mesh
ANPING HONGYU WIREMESH CO.,LTD , https://www.hongyufence.com