Waterproofing is not only about the ground and the roof, but also the wall surface needs to be waterproof. If there is moisture on the wall, it will bubble and fall. So how should we do wall waterproofing? Of course, the use of waterproof coatings, special waterproof coatings can effectively prevent water from seeping into the wall, if you need to buy waterproof coatings, first and Xiaobian to learn about the top ten waterproof coatings .
First, what are the top ten waterproof coatings?
1, DAVCO Degao
After more than 20 years of development, Deco China has become one of the leaders in China's special mortar industry, top ten waterproof coatings, Deco K11 waterproofing paste, Tecco TTB tile adhesive, Degao beauty grout, color tile filling Sewing materials and other products have won the trust of customers with their reliable quality and become a high-quality brand in the Chinese market.
2, Pattex Decker
Henkel (China) Investment Co., Ltd., Pattex Black & Decker, started in Germany in 1956, a famous brand in the field of civil adhesives, a global strategic brand created by Henkel Group, focusing on construction / civil decoration / stationery adhesives product.
3. Sika Sika
Sika (China) Co., Ltd., Sika Sika, founded in 1910, is the world's leading professional construction chemicals company, the world's leading supplier of building and infrastructure protection materials, and specialized in the production and management of chemical materials worldwide. Multinational company.
4. Elidet Elokt
Guangdong Yilaide Building Materials Co., Ltd. (hereinafter referred to as Yilaide) is a wholly-owned subsidiary of Keshun Group, which specializes in the research, development, production, sales and construction of home improvement waterproofing and decorative materials. provider.
5, Wan Shibo
Founded in 2006, Fuzhou Wanshibo Building Materials Co., Ltd. is headquartered in Fuzhou, the ancient capital of Fujian. Once a partner in China and Singapore, it introduced Singapore's leading dry mortar technology. The company officially became a wholly-owned company in China in 2012.
6, Yu Wang
Founded in 1985, the famous trademark of Liaoning Province, the industry standard setter, pioneered the modified bitumen waterproofing membrane, the "thin lamination prevention" application technology, the professional manufacturer of waterproof materials.
7, Longma LOMMOL
Health is the eternal pursuit. Longma is committed to beautifying and protecting the home environment, and is committed to providing consumers with more professional, environmentally friendly, healthier and more assured building chemicals. The company implements the ISO14001 international environmental management system and has passed the “China Environmental Labeling Product Certification†to meet international environmental protection standards.
8, Desheng
Tangshan Desheng Waterproof Co., Ltd. was founded in 2000. Since its inception, "the system solves the problem of leakage of buildings, shoulders the responsibility of China's waterproofing industry, and sets the benchmark for the world's waterproof business" has become the dream of the company.
9. Daming DYNAMIC
The company has a well-established sales network, and we have sales organizations or distributors in major cities across the country. The company has the second-class qualification of national professional waterproof construction, with an annual construction capacity of 5 million square meters, and can undertake various waterproof and anti-seepage projects such as building roof, wall, underground, railway, road bridge and landfill.
10. Nippon Nippon
Nippon has always been committed to beautifying and protecting people's lives, constantly creating products of superior quality, and letting beautiful color footprints spread everywhere in China.
Second, waterproof coating construction program
1. Base treatment: The surface of the base layer must be smooth and smooth, and there should be no unevenness, no sand holes or holes. If the above phenomenon should be repaired after smoothing and smoothing, the surface must be dry. The end of the pipe must be smeared at an arc angle and the pipe must be firm.
2. The waterproof base layer should be smeared with 1:3 cement mortar according to the design requirements, and the surface should be smoothed and calendered. No defects such as unevenness, looseness and sanding and ash are allowed. The drain or floor drain should be lower than the entire waterproof layer to remove stagnant water. The pipe part with casing should be more than 20MM above the surface of the base layer. The yin and yang corners should be made with small rounded corners of 10MM for coating construction.
3. When the traditional polyurethane waterproof coating is applied, the waterproof base layer should be basically dry, and the water content is less than 9%. The simple measurement method is to cover the rubber layer with the area of ​​1m2 and the thickness of 1.5~2.0MM on the base layer. , placed for 2 ~ 3h, if the surface of the covered base layer has no watermark, the rubber sheet on the side of the base layer has no condensation watermark. According to experience, the water content is less than 9%, which meets the construction requirements.
4. Brush the base layer treatment agent, mix the synthetic polymer waterproof coating primer evenly, and then use a long roller brush or a rubber brush to scrape the board, apply the waterproof material evenly to the base layer, and do not stack when painting. And the bottom of the white, the amount of brushing, each time around 0.4kg / square meter is appropriate, the first time it is completely dry before you can brush the second time.
The top ten waterproof coatings brought to you by everyone are very famous, especially the first place in Degao. I believe everyone has heard that when we buy, there is absolutely no problem in buying these brands. I hope that today’s introduction Can help everyone. For more exciting home improvement information, please continue to pay attention to the decoration home network.
More related wonderful reading:
What are the top ten waterproof coating brands in China? Paint brand introduction
1.Application:Aluminium Profile For Household Decoration
2.Dimension: Customized dimension, OEM & ODM
3.Material: A6063, A6061, A3003 and other series alu alloy
4.Suface treatment: Anodizing, polishing, turning ,power coating, mill finish etc
5.Equipment: CNC ,extruding machine, cold drawn machine, heating oven, straightening machine, cutting machine
|
OD |
OD Tolerance |
ID Tolerance |
Roundness |
Straightness |
Circular run-out |
|
φ16-20 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
|
φ20-30 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
|
φ30-50 |
±0.05 |
±0.05 |
0.02↓ |
0.020↓ |
0.08↓ |
|
φ50-80 |
±0.15 |
±0.10 |
0.05↓ |
0.025↓ |
0.10↓ |
6. STANDARD PACKING:Wooden case/carton
7. Trade Terms
1. Payment: 30% T/T in advance, 70% balance pay before delivery. L/C at sight.
2. Delivery time: 20 days after deposit receiverd. If opening mould, plus 7-10 days.
3. Trade Term can be chosen depending on your requirements.
4. FOB Port: Shanghai
Contact Us
If you want more info.about the aluminum tubes/profiles, please feel free to contact us.
1. Attn: Karina Gu
2. Mobile: +86-18961469527
3. Tel: +86-519-88761254
Aluminium Profile For Household Decoration
Aluminium Profile For Household Decoration,Aluminum Extrusion Profiles,Extruded Aluminum Profiles,Aluminium Trim Profiles
Changzhou YiFei Machinery Co., Ltd. , https://www.yifeialu.com