The emergence of the washing machine has greatly facilitated our lives and liberated people's hands. Whether it is to wash clothes in winter or in summer is no longer a problem. The washing of the faucets is also very particular. If you buy a bad faucet, sometimes there will be water leakage, which will affect your future life. Today, Xiaobian will bring you the material and installation steps of the faucet for washing machine !
First, the washing machine faucet 3 material
1. Ceramic valve core is better: common washing machine faucet valve core has steel ball valve core and ceramic valve core. The steel ball valve core has good resistance to pressure, but the disadvantage is that the rubber sealing ring that acts as a seal is easy to wear and will soon age. Compared with the steel ball valve core, the ceramic valve core is more resistant to heat and wear, and the ceramic valve core itself has a good sealing performance, so that a high degree of opening resistance can be achieved without fading of the nozzle due to wear of the valve core. The faucet with ceramic valve core is more comfortable and smooth in hand, and opens and closes quickly. According to the feel of the handle when turning the handle, it is easy to judge whether the spool is good or bad. Generally speaking, the handle is turned up, down, left, and right. If it feels light and has no blockage, the spool is better.
2. Brass material is good: the main body of the washing machine faucet is generally brass. The quality of the plating made of brass can ensure that the higher the purity of the brass, the better the plating quality, and the harder the surface plating layer is. In general, the method of estimating the weight can be used for identification. The brass is heavier and harder, and the zinc alloy is lighter and softer. The quality of the faucet should not be judged by weight alone, because some manufacturers can make the faucet heavier by increasing the wall thickness of the faucet or adding other metal materials. It is good to ask the salesperson for the test report of the product and see what the material of the product is.
3. The coating should be bright: after the faucet is polished and polished, the surface should be plated with nickel or chrome to oxidize the waterproof faucet. When purchasing, please place the faucet in a place with sufficient light. The surface of the faucet should be bright as a mirror, without any oxidized spots, burnt marks, no pores, no blistering, no leakage plating, uniform color, no touch by hand. After the burrs and sand particles are pressed against the faucet with their fingers, the fingerprints are quickly scattered and the dirt is not easily attached.
Second, the washing machine faucet installation steps
1. Hold the connector in one hand and pull down the buckle with one hand to separate the connector from the inlet pipe.
2. Loosen the 4 fastening screws on the upper connector and unscrew the connector so that there is a gap between the upper and lower connectors. If the faucet is too thick, you can remove the plastic guide sleeve inside.
3. Evenly adjust the four screws of the connector so that the two screws on the wall side are in full contact with the outside of the faucet. Screws near the wall can be pre-screwed by hand.
4. Hold the upper connector against the faucet so that the inner seal is in full contact with the faucet. Note: The seal must not be removed and the faucet must be flat.
5. Rotate the two screws on the opposite side of the wall to make contact with the faucet, then tighten with a screwdriver.
6. Rotate the lower connector until the upper and lower connectors are tightened. The gap between the two is 3mm.
7. Press the buckle of the gold city tube down.
8. Insert the inlet pipe up into the lower connector and release the buckle.
9. Check for water leakage. If it leaks, reinstall it. Note that the faucet uses a standard faucet.
Through the above we have learned some materials for the faucet of the washing machine and to avoid the leakage of the washing machine faucet, Xiaobian recommended the installation steps for everyone. Today, the contents of the faucet for washing machines are here. To learn more about decoration, please continue to pay attention to the decoration home network!
Citric Acid Food Additive,Citric Acid,Citric Acid In Food,Food Grade Citric Acid
Shaanxi United Xingchuang International Co., Ltd. , https://www.lxcgj.com