Composite corners for aluminum alloy doors and windows can reduce costs

The traditional aluminum alloy corners require the purchase of professional corner cutting saws, which have dedicated personnel to operate and invest in plant and electricity. The cost is high and should not be controlled. In the process of cutting, there is about half of sawdust waste, if not Measured at any time, the size of the deviation, there is a large amount of waste, the required amount and the actual material is not easy to control, the purchase of goods need to be the whole root purchase, much less will increase the cost, often when the time is tight, Corners are not available, if the machine fails, it is the owner's urgency to get angry. This example is not uncommon in our after-sales service process. In order to solve this problem, we have specially developed a new type of composite corner code, which has the following advantages compared to traditional aluminum alloy corner codes:

1 Replace traditional aluminum alloy corners, can reduce the application of aluminum materials, plastic materials, a molding, to avoid the secondary processing of traditional aluminum corners, save manpower, material resources, equipment, eliminate the aluminum corner cutting waste loss . Save energy.

2 The processing cycle of the product is shortened. The traditional aluminum angle is 6 meters long aluminum alloy. In the entire process of production and processing, not only is the process complex and the accuracy is not high enough and the waste is serious. The compound set of corner angles can be produced at one time according to the specifications required by the customer without post-processing. High accuracy, high efficiency, availability of customers at the same time, improving the efficiency of the building.

3 The composite corner code is superior in corrosion resistance. At the same time there are enhanced steel structure to ensure the hardness of the product. As the composite corner code is a German patented technology, the chemical engineering material PA66 (nylon) is used as the material, which greatly improves the corrosion resistance of the product and is suitable for various humid environments and factory workshops. PA66 has a higher melting point. It is a semi-crystalline-crystalline material. PA66 also maintains strong strength and stiffness at higher temperatures. At the same time has a high degree of durability, anti-aging ability.

4 high antioxidant capacity, better compatibility. The use of a composite set of corner-angle codes reduces the cost by approximately 30% compared to the use of similar aluminum alloy corner codes and shortens the processing cycle. The product is widely used in the processing of aluminum alloy doors and windows, which can directly increase the economic benefit for the user and greatly reduce the use of aluminum. Create a national energy-saving and environment-friendly society for the country to play a role. With more than 100 kinds of specifications, we can open another mold for you and supply it in time.

Posted on