The natural, well-being and safety of the kitchen is of the utmost importance, and all major brands are committed to using updated, more environmentally-friendly materials to reach this intent. When you buy cabinets, it is very easy to neglect many of the core problems associated with environmental protection in the kitchen. For example, the noise brought by the drawers and cabinets in the kitchen, the use of cracks and power consumption after a few years of use. The environmentally friendly kitchen is not only the environmental protection of the board, but also the details of the core, such as no noise, low energy consumption. Compare the following links to see if your kitchen is environmentally friendly.
First, the E1 cabinet
E0 grade plates do not contain green moisture-proofing agents. They do not need to be glued. The resistance to moisture and moisture is relatively low. The substrate used for furniture will be very good, but in the kitchen, it will be easily cracked by moisture. Cabinets that reach the E1 environmental indicators can be called environmentally friendly cabinets.
Second, Conce
The inner cabinet of the cabinet usually has a row of drill holes. If there is no cover, even if the plate meets the E1 standard, the formaldehyde in the cabinet will be slowly leaked, plus the hole plug, and the box body is unsightly. The small hole disappeared and the amount of formaldehyde released from the box was minimized.
Third, edge banding
The sealing process of the cabinet is very important. It is necessary to use the imported edge banding machine, and also cooperate with the imported hot melt glue, so as to achieve the effect of sealing the plate. Prompt you, the correct side panel sealing method is to seal the four sides of the side panels, the thickness is better than 1 mm.
Fourth, the back plate
Most manufacturers use single-sided stickers in the middle of the board or Polaroid board as the backboard of the cabinet, which is covered on one side and exposed on the other. The exposed surface does not hinder the release of formaldehyde. The backboard should be double-sided pasteboard, such as the dew river particleboard, to reach the E1 specification.
Five, BLUM hinge and BLUM hinge damper
The noise reduction is also environmentally friendly. BLUM hinges and BLUM hinge dampers are installed on the cabinet to avoid the noise generated when the door panel is closed and collided with the cabinet, and the rebound speed of the door panel is lowered.
Sixth, anti-collision strip
The anti-collision strip and the edge strip are disposable in the production process, which not only slows down the impact of the door panel, eliminates noise, but also enhances the sealing property of the cabinet panel and avoids moisture deformation of the panel. Because there is no slotting, the edge strips look beautiful.
Seven, metal flexible architecture
In order to deal with the problem of table cracking, it is possible to choose a metal flexible structure suitable for artificial stone countertops, and replace the wooden structure with metal supports under the countertops to extend the working time of the countertops. The joint connection between the lower track and the lock card can avoid deformation and cracking.
Eight, metal drawer
Plastic drawers are not environmentally friendly, and today aluminum drawers are prevalent, and the main body is not plasticized.
Such a drawer does not only take a long time to use the parts, and the colors are consistent and beautiful. The aluminum alloy material is also used for the internal pumping, which is more convenient and suitable for use instead of the wooden baffle.
The car is the most common type of transport in the world. The main building material used in cars is the relatively cheap steel. However, as the automotive industry begins to pay more and more attention to fuel efficiency, reducing CO2 emissions and design, aluminium is playing an ever more important role in modern cars.
Typical alloy: 5182, 5083, 6016, 6011, 6N12, 6014, 6181A, 6009, 6005A, 6061, 6082
Product character: good weld ability, good formability, superb bake hardening ability
Product Certificate:
Aluminium For Automotive
Aluminium For Automotive,Automobile Aluminum Sheet,Tank Car Aluminium Coils,Cast Plate For Car Mould
La Ya Aluminium products Co.,Ltd. , http://www.layametal.com