7kv Static High Voltage Generator for Ion Bar Remove Static Electricity

7KV Static High Voltage Generator For Ion bar Remove Static Electricity
 

Working principle:

 

The anti-static ion bar can produce plenty of positive & negative ions, which can neutralize the products' ions  that go through the ion radiation area. When the products surface with negative ion, it will attract radiation area's positive ion; when the products surface with positive ion, it will attract radiation area's negative ion, so that static on products surface will be neutralized, and then eliminate static electricity.

 

Features:

 

1. Use hard aluminum alloy material, beautiful appearance;

2. No electric shock design, more safe;

3. Built-in an unique high air volume tube;

4. Neutralize static electricity quickly

5. Stable and safe working performance

6. Easy and convenient installation

7. The ion bar has good ground protection

8. Ion bar should be equipped with a 7.0 KV generator

 

Suitable Industries:

 

It is suitable for anti-static in a flat occasion like thin material processing, slitting, coil stock, etc.

 

Technical data

 

 

Safety indication:

 

1. operating point must connect ground well

2. do not use the bar under inflammable and explosive environment

3. do not repair by yourself

 

Installation and operation:

 

The bar must work with generator. Plug the bar's connecting line terminal into the output plughole of the generator, and connect the bar's ground wire into the generator's ground pole, after confirm ground connection is well, plug the generator's attaching plug into the socket with ground wire(attention to the operating voltage of generator),install the bar to suitable position, turn on the generator's power supply, then it can work.

 

Cleaning method

 

After using for some time, there is dirt retention on bar's ion needle and copper tube wall, it must clean at regular intervals, and must turn off power supply when clean.  

 

 

We supplier a wide range of  BSP, JIC, NPT, Din Metric, Flanges, Standpipes, Komatsu, Toyota,  Hydraulic One piece Fittings, Reusable Hose Fittings etc. OEMs and fitting manufacturers are constantly finding new ways to stump us with different threads and new ways to seal them.  Our other fittings incluld banjo fittings, banjo bolt, waterwash inserts fittings, SAE staplelok male fitting, double connector and so on. We also specializing in customized Hydraulic Fittings

Other Hose Fittings

High Pressure Hose Fittings,Braided Hose Fittings,Hose End Fittings ,Hose Barb Fittings

SHIJIAZHUANG TOPA TRADING CO., LTD. , http://www.topahydraulic.com