New Solar Power Siren Solar Alarm with Long Life Battery Support 1 Month

1. Fashionable and waterproof design
With double-deck waterproof coil design, it can work in normal state in any weather outdoor.
2. Alarm with flash light and sound
Integrate both high-bright flash light and high-decibel sound. When alarm occurs, bright light and sharp alarm will effectively shock and deter the criminals.
3. Wireless detection
It can work as a high power flash siren as well as a spot alarm panel. As an alarm panel, it can work with at most 100 wireless detectors.
4. Solar power supply, energy-saving and environment friendly
Solar panel can change solar power into electric power supply for the whole system. With a large area of solar panel and large capacity of built-in battery as well as its lower power consumption, it can work normally even in cloudy and rainy days for a month.
I. Operation guidance
Transmitter coding: Set the wireless transmitter of the siren with the alarm panel (some alarm panels have built-in transmitter, please refer to the user manual of alarm panel for details).
1) Enter coding: In standby status, press CODE button for two seconds, then LED 1 flashes once and siren makes a beep sound, release the button immediately and enter coding status.
2) In coding status, press any button on the remote controller of the alarm panel, coding signal will be immediately sent out from the transmitter. One beep sound will be heard after the siren receives the coding signal, which means successful coding. Two beep sound means the transmitter has been coded before.
3) Exit coding status: In coding status, press CODE button for two seconds. Release the button after LED1 flashes once and the siren makes a beep sound. Then the siren returns to standby status.
4) Delete code: Press the CODE button, there will be one beep. Keep pressing until two beeps sound is heard. All transmitter codes will be deleted.
Note: This product can be used as spot alarm and work together with wireless detectors such as remote controllers, magnetic gap sensor, PIR detectors. Coding method is as the above stated.
I. Technical parameters (only for reference)
Standby current: <10mA
Solar power recharging current: 155mA
External power supply: DC12V/1.2A Recharging current: 310mA
Alarm current: 350mA
Wireless receiving frequency: 868/433± 0.5MHZ
Wireless receiving distance: >80M (no obstacle)
Working temperature: +10C ~+40C
Humidity: £ 90% (no fog)
Built-in battery: Polymer battery 7.4V/2100mA 1. Fashionable and waterproof design
With double-deck waterproof coil design, it can work in normal state in any weather outdoor.
2. Alarm with flash light and sound
Integrate both high-bright flash light and high-decibel sound. When alarm occurs, bright light and sharp alarm will effectively shock and deter the criminals.
3. Wireless detection
It can work as a high power flash siren as well as a spot alarm panel. As an alarm panel, it can work with at most 100 wireless detectors.
4. Solar power supply, energy-saving and environment friendly
Solar panel can change solar power into electric power supply for the whole system. With a large area of solar panel and large capacity of built-in battery as well as its lower power consumption, it can work normally even in cloudy and rainy days for a month.
I. Operation guidance
Transmitter coding: Set the wireless transmitter of the siren with the alarm panel (some alarm panels have built-in transmitter, please refer to the user manual of alarm panel for details).
1) Enter coding: In standby status, press CODE button for two seconds, then LED 1 flashes once and siren makes a beep sound, release the button immediately and enter coding status.
2) In coding status, press any button on the remote controller of the alarm panel, coding signal will be immediately sent out from the transmitter. One beep sound will be heard after the siren receives the coding signal, which means successful coding. Two beep sound means the transmitter has been coded before.
3) Exit coding status: In coding status, press CODE button for two seconds. Release the button after LED1 flashes once and the siren makes a beep sound. Then the siren returns to standby status.
4) Delete code: Press the CODE button, there will be one beep. Keep pressing until two beeps sound is heard. All transmitter codes will be deleted.
Note: This product can be used as spot alarm and work together with wireless detectors such as remote controllers, magnetic gap sensor, PIR detectors. Coding method is as the above stated.
I. Technical parameters (only for reference)
Standby current: <10mA
Solar power recharging current: 155mA
External power supply: DC12V/1.2A Recharging current: 310mA
Alarm current: 350mA
Wireless receiving frequency: 868/433± 0.5MHZ
Wireless receiving distance: >80M (no obstacle)
Working temperature: +10C ~+40C
Humidity: £ 90% (no fog)
Built-in battery: Polymer battery 7.4V/2100mA

High Grade N52 Magnet

Neodimium Magnet,High Gauss Magnet,High Power Magnets

Fenghua Jade Motor Co., Ltd. , http://www.motor-magnet.com