The sink you just bought is always light and pleasing. Can not be used for as long as it has become another appearance, water stains, rust, mold ... ... how to wipe people feel dirty, worn out. How is this going? One may be that the product itself is of poor quality, and secondly, you do not care for the home sink. After picking the sinks according to the method taught by the experts, you should also "care" them so that the sinks can be kept fresh.
"Is stainless steel rusting? Is it a problem with quality?" Actually not. Stainless steel sink will certainly rust! Because it is a very thin, dense, strong and stable chromium-rich oxide film (protective film) on the surface, it can prevent oxygen atoms from infiltrating and oxidizing at ordinary times and obtain the ability to resist rust. However, if for some reason, the film is destroyed, so that air, oxygen atoms in the liquid infiltration, it is easy to form loose iron oxide, so that stainless steel is also "rust."
For the friends who use stainless steel, it is recommended that you usually do this:
1. After the water tank arrives at the site, the house is still under renovation. Pay attention to the ventilation of the window, so as to avoid oxidation of the surface of the tank caused by the corrosive gas emitted from the decoration materials, thus causing the tank to rust.
2. For newly-renovated customers, you can apply a layer of oil to the surface of the sink. When using it, it will be less prone to rust than normal sinks. If you do not use the sink for a long time, you can use the same method! If you have a rust, wipe it with your toothpaste at home and you will have a good rust removal effect.
3. After using the sink, try to rinse it with clean water and wipe it dry. Do not allow water droplets to remain on the surface of the sink. High-iron content water may cause reddish brown marks on the surface. If water is produced, use a detergency powder or a melon to wash it. Yes.
4. If the water that is not normally wiped off has already produced water stains that are difficult to remove, it can be removed with a low concentration of vinegar solution and finally completely washed with fresh water.
5, to clean the sink frequently, it is best to use sponge, cloth and neutral detergent.
>>> Links: How to identify the quality of stainless steel sinks
6, scrub the sink as far as possible without steel wool, steel brush or coarse brush texture, because of their large scrub strength, it is easy to scratch the stainless steel protective film or the sink of metal particles in the basin wall, over time, easy to produce Rust spots affect the life of the sink.
7. Try not to use a rubber pad in the sink, because the dirt under the rubber pad is difficult to clean.
8. Do not touch the surface of the sink with liquids containing heavy metals, otherwise it may cause surface discoloration or rust spots. If it is contaminated, dry it immediately with a towel.
9. When using the sink, try to avoid prolonged contact with drifting powder, household chemicals and soap. If it is used, wash it with water as soon as possible and dry it with a towel.
10. If you accidentally drop the photographic drug or solder melt into the sink, clean it immediately with water.
Having seen the above introduction, the smart housewife already knows how to maintain the stainless steel sink at home?
Sink entrance decoration stainless steel window
Onshore Carbon Steel Pipe,Sa 179 Carbon Steel Pipe,Schedule 40 Carbon Steel Pipe
Fenghua Jade Motor Co., Ltd. , http://www.chinaseamlesssteelpipe.com