32mm system process
According to the standard 32mm system technology, it is designed and manufactured to meet the needs of standardized and large-scale production, ensuring the high quality of each set of cabinets.
Aluminum alloy front belt
Basin cupboards and countertop cabinets are equipped with front aluminum strips for the reinforcement of water basins and countertop cabinets. Aluminum alloy strips are not easily corroded and the cabinet strength is improved.
Water basin cabinet floor moisture-proof design
The bottom plate of the washbasin cabinet is equipped with a waterproof aluminum foil plate, which plays a role in enhancing the moisture proof effect of the bottom plate of the water basin cabinet, prolongs the service life of the cabinet, and is easier to clean.
Backplane
The rear panel adopts a double-sided Yoshida MDF with a thickness of 3mm. Compared with single-sided backplanes, formaldehyde emissions from double-sided backplanes are smaller and more environmentally friendly. Kyrgyzstan MDF has better toughness than chipboard backboard, and it is not easy to break, guarantees the squareness of the cabinet, and prolongs the service life of the cabinet.
U type opening seal
The water tank under the water tank cabinet is sealed under the water jacket to prevent the condensation water from intruding into the bottom plate and prevent the bottom plate from moisture deformation. Effective to prevent the release of formaldehyde.
Adjust the feet
ABS adjustable feet, non-toxic, non-polluting, corrosion resistance, high strength, strong and durable.
Third generation full removable box
The third-generation fully-removable box structure design adopts three-in-one connector and raft assembly to enable the cabinet to be repeatedly disassembled and reassembled, reducing the adhesive and making the environmental protection good.
Box board
The box board adopts Jilin Forest Industry Dew River River with particle board, European standard E0. Compared with the general particle board, it has better environmental performance and prolongs the service life of the cabinet.
Table under the details of processing
Under the countertops, the entire pad plate is added to evenly distribute the pressure on the tabletop to enhance the impact resistance of the tabletop and prolong the service life of the tabletop. Waterproof ditch at the lower edge of the table to prevent the water from falling on the door panel, avoiding water erosion on the door panel and the cabinet.
Skirting board
Aluminum alloy skirting board, compared with PVC skirting board, more resistant to corrosion, anti-aging, longer life.
Crystal Corner
Cabinet corner or wooden drawer dead corner installed dust crystal angle, so that dust is not easy to accumulate in the corner, easy to clean, keep the cabinet clean.
Row plug
Drain holes in the cabinet body to seal caps to prevent moisture from entering the cabinet, resulting in lower methanol emissions.
Tamper bar / bumper bar
The front sealing edge of the box is sealed with a bumper strip. The crash strip is flexible and hard to age. It seals the gap between the cabinet and the door panel to prevent dust, dirt, etc. from entering the cabinet, thereby maintaining the cleanliness of the cabinet. .
Spacer aluminum alloy front edge sealing
The front of the partition adopts aluminum alloy edge-sealing and circular-arc edge design, so that the edges of the partition do not scratch the hand, and at the same time it plays a role of strengthening the load-bearing of the partition, so that the partition is not easily deformed under the load-bearing conditions, and the articles on the partition can also be prevented. Slide out.
Cabinets to buy aluminum formaldehyde cabinet door cupboard door drawer cabinet cupboard door
Fenghua Jade Motor Co., Ltd. , http://www.ywwjsl.com