In the cylinder of the diesel engine, the clean air filtered by the air filter is fully mixed with the high-pressure atomized diesel fuel injected from the injector. Under the upward extrusion of the piston, the volume is reduced and the temperature is rapidly increased to reach the ignition point of the diesel.
The diesel is ignited, the mixed gas burns violently, and the volume expands rapidly, pushing the piston down, called 'work'. Each cylinder performs work in a certain order, and the thrust acting on the piston passes through the connecting rod to become a force that pushes the crankshaft to rotate, thereby driving the crankshaft to rotate.
By installing the brushless synchronous alternator coaxially with the diesel engine crankshaft, the rotor of the generator can be driven by the rotation of the diesel engine. By using the principle of 'electromagnetic induction', the generator will output an induced electromotive force, and a current can be generated through the closed load circuit. .
Only the most basic working principle of the generator set is described here. A range of diesel and generator control, protection devices and circuits are also required to obtain a usable, stable power output.
The gasoline engine drives the generator to operate, converting the energy of the gasoline into electrical energy.
In the cylinder of the gasoline engine, the mixed gas burns violently, and the volume expands rapidly, pushing the piston to work downward. Each cylinder performs work in a certain order, and the thrust acting on the piston passes through the connecting rod to become a force that pushes the crankshaft to rotate, thereby driving the crankshaft to rotate. By installing the brushless synchronous alternator coaxially with the gasoline engine crankshaft, the rotor of the generator can be driven by the rotation of the gasoline engine. By using the principle of 'electromagnetic induction', the generator will output an induced electromotive force, and a current can be generated through the closed load circuit. .
·The establishment of the main magnetic field: the excitation winding is connected with the DC excitation current to establish the excitation magnetic field between the polar phases, that is, the main magnetic field is established.
Current-carrying conductor: A three-phase symmetrical armature winding acts as a power winding and acts as a carrier for inductive or induced current.
·Cutting movement: The prime mover drags the rotor to rotate (injecting mechanical energy into the motor), and the excitation magnetic field between the polar phases rotates with the shaft and sequentially cuts the stator phase windings (corresponding to the conductors of the windings to cut the excitation magnetic field).
• Generation of alternating potential: Due to the relative cutting motion between the armature winding and the main magnetic field, a three-phase symmetric alternating potential whose magnitude and direction change periodically will be induced in the armature winding. AC power is available through the lead wires.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
40m Electric Laser Distance Meter
The JRTMFG Laser Measure Tool is an advanced measuring tool apply for indoor measurement as well as for outdoor construction sites, which has different measurement modes including single measurement, continuous measurement (with Min/Max function), area/ volume measurement and Pythagoras Measurement. JRTMFG Laser Measurement Tool is a Class II laser product with less than 1mW power output. Measuring range covers from 0.15 to 40m.the measurement accuracy of +/- 2mm is achieved. The backlit LCD is easy to read and even in dark environments. There are 2 bubble levels installed for precise vertical and horizontal alignment of the laser. The default reference point can be set from the front or the rear of the tool. With this portable distance meter you can easily set up in meter/inch/foot. Up to 20 records can be saved and retrieved. The tool also has the mute button, and the functions of add/subtract measurements and self-calibration.The JRTMFG Laser Distance Measurement provides an easier and faster way to meet the needs of precise measurements. Due to its compact design, it can be easily pack in a bag or jacket pocket. Support oem Laser Rangefinder, welcome to send inquiry.
40m Electric Laser Distance Meter,meter distance,electronic distance
Chengdu ZT Electronics Technology Co., Ltd. , https://www.lasermeasuretool.com