Out of the need for environmental protection, there are fewer and fewer pure solid wood furniture. Most solid wood furniture is manufactured using a combination of solid wood and artificial board. This process avoids cracking and warping caused by the use of solid wood in a large area While deforming, it not only maintains the beautiful texture of pure natural logs, but also loses the noble and elegant essence of solid wood furniture. Due to the different materials, in the home store, the same dining table, the price of all solid wood, solid wood furniture, sheet furniture and board wood combined furniture differs by more than a thousand yuan. Therefore, to pick a piece of solid wood furniture, be sure to distinguish the material and usage.
At present, there are more than 10 kinds of trees used in solid wood furniture on the market, including beech, teak, maple, oak, oak, ash, birch, elm, poplar, linden, and pine, among which beech and oak , Fraxinus mandshurica is the most expensive, and the corresponding price is also higher. Solid wood furniture must look at patterns and scars, because solid wood furniture has a natural wood texture, a good solid wood board, you see a pattern from the front, open the cabinet door, the corresponding position can also see the corresponding pattern . Similarly, pure solid wood boards generally have scars on the front side, and there should be scars on the other side.
Shopping tips
"Three Looks":
Look at the material. Generally good solid wood furniture, after opening the door and drawer, its wood is dry and white, with clear texture, tight texture and fine texture. At the same time, good solid wood furniture requires no irritating smell after opening the door or drawer.
Look at the components. When buying solid wood furniture, carefully check the stress-bearing parts of the furniture, such as sofa legs, uprights, and load-bearing horizontal bars connecting the uprights to the ground to ensure that there are no large scars or cracks or cracks; check the sliding and positioning of the drawer. Open all cabinet doors and drawers to see if the screws at the joints of the components are tightened; whether the internal man-made board has been edge-sealed, and various accessories are installed with many pieces, no nails and no nails.
Look at the place of origin. If the moisture content of solid wood furniture is higher than 1% of the average moisture content in the area of ​​use, cracks, deformation, loosening, warping, etc. may occur. Therefore, it is best to buy furniture produced by brand enterprises with good drying technology.
"Two Touch"
Whether the surface is smooth is touched, the surface of a good solid wood furniture is smooth, and there will be no problems such as protrusions; then touch the corners and other parts of the furniture, if there are roughness, paint is too thick, etc., it means that the processing technology is poor.
"One Press"
When selecting solid wood furniture, lightly press the various stress points of the furniture, such as column corners, drawers or shelf supports, to test whether it is stable.
View paint quality
After the board surface is painted, it is called a paint board. Pay attention to the three points and the three points when selecting. The third is: the paint surface should be uniform, smooth and smooth (not included in the chamfer). Three is no: no paint leakage, no bubbles, no cracks.
Whirlpool Bathtub
Whirlpool Bathtub
Guangzhou Aijingsi Sanitary Products Co.,Ltd , https://www.infinityedgehottub.com