YCB series arc gear pump purposes Arc gear pump is suitable for conveying solid particles and fiber-free, non-corrosive, the temperature is not higher than 80 ℃, the viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5 -1500 cSt) or other liquids of a similar nature as lubricating oils, as well as for hydraulic drive systems. YCB series arc gear pump applications arc gear pump in the oil transmission system can be used as transmission, booster pump; arc gear pump in the fuel system can be used as transmission, pressure, jet fuel pump; arc Gear pumps can be used as a hydraulic pump in the hydraulic transmission system to provide hydraulic power; arc gear pump in all industrial areas, can be used for lubricating oil pump. YCB series arc gear pump structural features This series of gear pump gear, shaft, pump body, pump cover, bearing sleeve, shaft seal and other components. Gear with double arc sinusoidal tooth shape manufacturing. Compared with the involute gear, it has the most prominent advantage that the tooth profile has no relative sliding during gear meshing. Therefore, the tooth surface has no wear, stable operation, no fluid due to low noise, long service life and high efficiency. The pump out of the shackles of the traditional design, making the gear pump in the design, production and use into a new field. Pump with safety valve as overload protection, safety valve full back pressure of the pump rated discharge pressure of 1.5 times. Can also be allowed to discharge pressure within the scope of the actual need to be adjusted. But note that the safety valve can not be a long-term work of the valve, if necessary, can be installed separately in the pipeline. Pump shaft seal is designed in two forms, one for the mechanical seal, one is the packing seal, according to the specific use and user requirements. From the spindle extension to the pump to see, clockwise rotation.
Pest Control Insecticide,Electrical Products Co., Ltd. , http://www.nsmosquitos.com