How to choose bathroom tiles

Tiles are an important part of bathroom waterproofing and an important part of bathroom decoration. How to choose the bathroom tiles? Whether it is the color or texture of the tiles, there are skills to buy. The choice of bathroom wall tiles: the bathroom walls must be covered with water-resistant tiles and anti-corrosion and anti-mold tiles (or glass tiles); the choice of bathroom floor tiles: the floor is best to use anti-slip floor tiles with raised patterns.

How to choose the bathroom tile index 1: tile texture density

Tiles for the purchase of bathroom space have stricter requirements on the quality of the tiles themselves. When purchasing tiles, you can see from the side whether the brick surface is flat and whether there are pinholes with uneven thickness. At the same time, the tile can be tapped to hear whether the sound is crisp and the sound is more brittle, indicating that the tile has a high density and a good hardness.

How to choose the bathroom tile index two: tile water absorption rate

Tiles for the purchase of bathroom space should first pay attention to its water absorption rate. In general, high quality tiles have a low water absorption rate so they can dry quickly. If the tile does not indicate the water absorption rate, you can use tea or water droplets on the back of the tile. After a few minutes, the degree of diffusion of the water droplets is observed. The less water is absorbed, the lower the water absorption rate and the better the quality.

How to choose the bathroom tile index three: the degree of glaze on the brick surface

When purchasing, it can be identified by judging the thickness of the glaze on the tile surface. The surface of the brick can be scraped with a hard object, and if a scratch occurs, it means that the glaze is insufficient. After the thinner glaze layer on the tile surface is polished, the brick surface is easily stained, difficult to clean, and lacks safety. Some unglazed floor tiles are generally not suitable for being placed in a damp and closed environment. Because the pores on the bricks absorb water and cannot diverge, they can also cause mold.

How to tile color in bathroom:

The color of the bathroom tiles may first be chosen according to the overall style of the bathroom, followed by the color that you like. However, for most small-sized families, the color of the bathroom tiles is best to choose light-colored tiles, do not choose black or dark. The light color refracts the line of sight from the light, making the bathroom look more spacious and bright.

What tiles are used in the bathroom:

The bathroom usually has a relatively high humidity, and the requirements for the tile are waterproof, slip resistant and wear resistant. The bathroom floor tiles are generally made of whole body bricks, which have good non-slip wear resistance; the bathroom wall tiles are usually made of glazed tiles, and the glazed tiles are rich in glazed color patterns and have strong anti-pollution ability.

Summary: The choice of bathroom tiles looks simple, but there are some little learning in it. Whether it is the color or quality of the tiles, there are many places to pay attention to. It is important to choose a non-slip, wear-resistant tile in the bathroom, which is also for your own safety.

Polypropylene fiber by polypropylene and a variety of organic and inorganic materials, refined by special composite technology, products can be formed in the concrete three-dimensional supporting role to the distribution of the mesh, the micro cracks formed at the beginning of the hardening concrete was blocked in the process of development, to develop further. Thus, it can improve the fracture toughness of concrete and improve the anti-seepage properties of concrete. It is a new ideal material for mortar, concrete engineering, anti-cracking, anti-seepage, wear-resisting and heat preservation.

The anti-cracking ability of the non-structural crack in the plastic stage of concrete is improved.

It is a kind of effective rigid self-waterproofing material.

The range of noil is 0.6-1.8 kg/m3, and the concrete anti-cracking anti-seepage is usually 0.9kg/m3.

Main functions: to prevent concrete cracks, improve the permeability resistance of concrete, improve the freezing-thawing resisting performance of concrete, improve the impact resistance of concrete, folding resistance, fatigue resistance, seismic performance, improve the durability of concrete, aging resistance, improve the fireproof performance of concrete.

Mortar/concrete Fibre

Fiber Concrete,Mortar Fibre,Crack Resistant Fiber Concrete,Crack Resistant Mortar Fibre

Hebei pancan trading co. LTD , https://www.hbpancanshangmao.com

Posted on