Three-ring electronic lock fault diagnosis and processing methods?

In the process of using the electronic lock, it is inevitable that there will be some minor faults, and this time do not rush, sometimes we can check under their own, do not have special trouble to find maintenance workers, the following will introduce the next three-ring electronic lock Fault diagnosis and processing methods. Hope can help everyone.

First, the total card building Dongka floor card can open the door alone guest card can not open the door

Approach:

1, check the guest card is not expired, extend the opening time

2, the room number is not set correctly, re-do a mounting card corresponding to the room number to re-install the door lock

Second, all the cards that opened the door are not open and they do not even respond

Approach:

1 sound: first check whether the battery is loosely connected or undervoltage, such as timely replacement of battery

2 sounds: Door lock error sound

2 sounds: battery undervoltage

3 sounds: The door is locked

6 sound: The room number of the guest card is incorrect or the group number of the group control card is incorrect.

7 sounds: The card has expired;

8 sounds: Cards covered by the back card or reported to be lost entirely, or the date of the card is valid but the time period is invalid

9 sounds: black list [prompt when the card is reported to be opened after a single loss]

10 sounds: The authorization code of the authorization card is invalid; [Please re-issue the card and perform an effective mechanical opening of the door with a mechanical key, which can solve this problem]

11 sounds: The floor number of the floor control card is incorrect or the floor number of the floor control card is incorrect

15 sounds: not the hotel's card

Third, touch the card sound lighting is normal can not open the door

Treatment method :

1. Check whether the square shaft of the handle and the cylinder block are connected properly. Disassemble the rear panel screws to adjust.

2, check the motor line and circuit board connection is normal, see if the thread joint loose

3, The motor is stuck and does not operate normally. Open the lock cylinder cover and open the cover to adjust the motor (you need to be trained by the company's professional staff to operate)

After reading it, did you remember that afterwards, if your home electronic lock had a similar fault, you could use it yourself. Think about it and feel great sense of achievement. Thank you for reading!

Related browsing

Article: How does the smart home control approach evolve?

Recommended: What is smart home smart home DIY smart home what

WIFI Smart Lock (http://zns.znjj.tv)-Professional smart lock agent joining website, providing the industry's most comprehensive intelligent fingerprint password lock joining agent, smart lock product library, smart door lock price, smart lock brand , smart lock manufacturers Daquan information, welcome to browse online consulting.