Gabions are baskets made of double twisted steel woven wire mesh ,as per EN 10223-3.Gabions are filled with stones at the project site to from flexible, permeable,monolithic structures such as retaining walls ,channel linings, and weirs for erosion control projects.
The steel wire used in the manufacture of gabion is heavily zinc coated soft temper steel.The gabion is divided into cells by means of diaphragm positioned at approximately 1 meter in order to reinforce the structure,all mesh panel edges are selvedged with a wire having a greater diameter.
Wire
All tests on wire must be performed prior to manufacturing the mesh.
1.tensile strength: the wire used for manufacture the gabions shall have a tensile strength between 350-500 N/mm2 according to EN 10223-3.Wire tolerances are in accordance with EN 10218(class 1)
2.elongation: elongation shall not be less than 10%,in accordance with EN 10223-3.Test must be carried out on the sample at least 25cm long.
3.zinc coating:minimum quantities of zinc coating meet the requirements of EN 10244-2(table 1,class A)
4.Adhesion of zinc:the adhesion of the zinc coating to the wire shall be such that,when the wire is wrapped six turns around mandrel having four times the diameter of the wire,it does not flake or crack when rubbing it with the bare finger.
Quantity request
When requesting a quote,please specify,
1>.size of unit (length x width x height)
2>.type of mesh
3>wire diameter
4>.type of coating and diaphragms
Specification:
Mesh type: 6cm x 8cm/8cm x 10cm/10cm x 12cm/12cm x 15cm
Wire diameter: 2.2mm-4.0mm
Unit gabion size: 2m x 1m x 1m/3m x 1m x 1m/4m x 1m x 1m and so on
Unit mattress size: 3m x 2m x 0.17m /5m x 3m x 0.3m/ 8m x 2m x 0.23m and so on
Type of coating:heavily hot-dipped galvanizing
| Nominal aperture size  |
Wire gauge  |
| 60*80 Â |
2.0mm-3.0mm  |
| 80*100 Â |
2.2mm-3.5mm  |
| 100*120 Â |
2.4mm-3.5mm  |
| 120*150 Â |
2.7mm-4.0mm  |
The kinds of specification of wire diameter
| Nominal aperture sizes(mm) Â |
The inner wire diameter/outer wire diameter  |
| 60*80 Â |
2.0mm/3.0mm-2.8mm/3.8mm  |
| 80*100 Â |
2.2mm/3.2mm-3.0mm/4.0mm  |
| 100*120 Â |
2.4mm/3.4mm-3.2mm/4.2mm  |
| 120*150 Â |
2.7mm/3.7mm-3.5mm/4.5mm  |
New design with Advantages:
1.Structure waterproof, applicable for buildings,roof ,various columns, oval columns, curved walls and other buildings, and any diameter trees or pole lighting.
2.Installation design:the world's first chain-type installation design; free punching design, do not damage the building structure. With eight kinds of patent .
3.Flexible bracket design,enable to adjust the distance between lamp and lighting surface;
4. With anti-glare grille and anti-glare baffle, double anti-glare.
5.Multi-color with DMX512 control system,grey rate upto 65536,refresh rate upto 4K.
6.. Desiged by our engineers, We are the sole owners. So we could control good quality step by step.
Architecture Lighting,Waterproof Led Projection Light,Ancient Building Tile Lamp,Pillar Surround Tree Light
Guangdong harmonglobal Lighting Co.,Ltd , https://www.harmonglobal.com