Cupro Nickel Alloy Sheet Monel K500 Plate for Valve 5*200mm

Model NO.: Monel K500
Yield Strength: >551 MPa
Tensile Strength: > 896 MPa
Elongation in 2 in.: > 20%
Hardness: 255~370 Hb
Chemical Composition: Cu,Ni
Packing Detail: Coil (Plastic Spool) + Compressed Ply-Wooden Case
Services: Small Order Accepted, Fast Delivery
Trademark: Ualloy
Specification: RoHS, SGS
Origin: Zhejiang, China
HS Code: 74122010
 Alloy K-500 has approximately twice the tensile strength and triple the yield strength of Alloy 400. The strength of Alloy K-500 is maintained to 1200 degrees Fahrenheit, but stays ductile and tough down to temperatures of -400 degrees Fahrenheit. Alloy K-500 also stays non-magnetic to -200 degrees Fahrenheit.
Additional characteristics of Alloy K-500 include outstanding corrosion resistance in a wide range of chemical and marine surroundings, from salts and alkalis, non-oxidizing acids to pure water. Alloy K-500 is non-magnetic and spark resistant. It is also recommended that Alloy K-500 be annealed when it is welded and that any weldments be stress relieved prior to aging.


Monel K500 with high strength corrosion fatigue and erosion resistance.shape! Shape we supply:Rod,Strip,Tube.
     Monel k500- Age-hardenable Nickel-Copper alloy which combines the corrosion resistance of Alloy 400 with high strength corrosion fatigue and erosion resistance.
     Alloy K-500 is a nickel-copper alloy, precipitation hardenable through additions of aluminum and titanium. This alloy retains the excellent corrosion resistant characteristics of 400 and has enhanced strength and hardness after precipitation hardening when compared with 400. Alloy K-500 has approximately three (3) times the yield strength and double the tensile strength when compared with 400. K-500 can be further strengthened by cold working before the precipitation hardening.
Characteristics
    1.Excellent mechanical properties from sub-zero temperatures up to about 480C.
    2.Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidising mineral acids, salts and alkalis.
Applications
    1.Propeller and pump shafts.
    2.Pumps and valves used in the manufacture of perchlorethylene, chlorinated plastics. 
1. Description
 
Monel is a series of nickel alloys, primarily composed of nickel (up to 67%) and copper, with some iron and other trace elements.
Chemical Content(%)
 
Mn Ni Cu C Si Al S Fe Ti
<1.5 Bal 27~33 <0.1 <0.5 2.3~3.5 <0.01 <2 0.35~0.85
 Mechanical Properties
 
Density 8.44 g/cm3
Melting Range 1300-1350 ºC
Yield Strength >551 Mpa
Tensile Strength > 896 Mpa
Elongation in 2 in. > 20%
Hardness 255~370 HB
 
2.Features: Monel K-500 combines Monel 400's excellent corrosion resistance with greater strength and hardness as a result of adding aluminum and titaniumand proper heat treatment to cause precipitation hardening. It is nonmagnetic at temperatures as low as -101ºC. Monel K-500 has excellent dimensional stability which is very useful in high precision devices. Like Monel 400, it does not undergo ductile-to-brittle transition at cryogenic temperatures as low as that of liquid hydrogen. Its tensile and yield strengths increase while ductility and toughness are only slightly impaired.

3. Packing detail
1) Coil (plastic spool) + compressed ply-wooden case + pallet 
 2) Coil (plastic spool) + carton + pallet  
 
4. Products and services
 
1). Pass: ISO9001 certification, and SO14001cetification;
2). Fine after-sale services;
3). Small order accepted;
4). Fast delivery;


5.Inspection and Test Procedure

1.100% PMI,Spectro Chemical Aanlysis Test for Raw Material
2.100% Dimension & Visual Examination 
3. Mechanical Properties Test Include Tension Test,Flaring Test (For Seamless tube/pipe)/ Flange Test (For Welded Pipe & Tube), Hardness Test ,Reversed Flattening Test
4.100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test  (ET or UT) 
5.Radiographic Test for Welded Pipe (shall be accordance with specification,or shall be as agreed upon between the purchaser and vendor)
6.Straightness Test  (optional)
7.Roughness Test (optional)
8.Intergranular Corrosion Test(optional)
9.Impact Test (optional)
10.Grain Size Determinations (optional)
NOTES : ALL THE TESTS AND INSPECTION RESULT NEED TO BE SHOWED IN REPORTS ACCORDING TO STANDARD AND SPECIFICATION.

6.Size
   Plate/sheet thickness:0.3-200mm.
            width:20mm-1200mm
 

640W Spider LED Grow Light

Our spider LED Grow Light series adpot Samsung and osram leds as light source, all the series is Full spectrum led grow lights.


It is ideal for all phases of plant growth and works well with water solution culture and soil culture.

It is suitable for commercial farming and large scare of plant farming.

Our grow lamps are widely used in vertical farms, greenhouse, urban agriculture, horticulture and so on. It is ideal replacement of 200W, 400W, 600W and 1000W metal halide lamps (MH) and high pressure sodium lamps (HPS).

Full Spectrum LED Growing Lamp meet all the light needs of plants throughout their growth from seed, germination, flowering to fruiting.


We are original factory in China,we supply OEM & ODM and full solutions services. We have reliable technical support and after-sales services. Welcome your cooperation.

16

2


spider grow light, Led Grow Plant,Grow Lights Led Strips,Grow Lamp Strips,640W Grow Light 8 Strips

Shenzhen Zhenyang Century Technology Co.,Ltd , https://www.growlightzy.com

Posted on