In everyone's ordinary life, there are many tools, large and small. The emergence of these tools is convenient for our lives. Some of these tools are familiar and often touched by us, but some of them are usually not directly contacted by us. Very important. Today I want to introduce to you the imported pneumatic glue gun. I believe many people know this tool, but they have never used it. Let's take a closer look at it together!
Â
　　 Classification of imported pneumatic glue gun
Â
1. Manual glue gun
The operator manually presses the wrench to achieve the glue, because it is manually operated by humans, the efficiency is low, and it is designed for infrequently used professionals or families.
2. Pneumatic glue gun
It needs to be connected to the compressed air source, and the air pushes the bottom of the glue to achieve the glue. The general factory production line is equipped with compression. The single pneumatic glue gun has a small amount of gas and can be equipped with a small air pump.
3. Electric glue gun
The electric glue gun is powered by a rechargeable battery. It is equipped with a charger and a rechargeable battery. Because it is powered by electricity, it can easily complete a large amount of glue work.
Â
How to use imported pneumatic glue gun
Â
First prepare various materials: glass glue, a glue gun, a knife. First cut off the glass seal. Pull the lever with the left hand, pull the trigger with the right hand, pull out the lever, install the glue bottle mouth on the glass glue bottle, install it on the glue gun, fix the glass glue, and then pull the wrench. The Other method is to press the rear buckle first and pull the wire backwards. Then put the head of the glass glue, tuck the whole glue in, and then loosen the thumb to squeeze out the glue.
Â
Precautions for the use of imported pneumatic glue guns
Â
1. The compressed air pressure connected to the glue gun cannot exceed 145p.si (10bar).
2. Do not connect compressed air before disassembling the glue gun.
3. In order to ensure the reliable operation of the glue gun, after use, the residual glue must be removed according to the solvent recommended by the sealant manufacturer (the glue gun is not allowed to be immersed in the solvent).
4. If the air slowly escapes from the trigger valve, the exhaust valve will obviously fail. If this happens, the diaphragm inside the silencer exhaust valve should be replaced.
5. When using, the front cover must be screwed tightly.
6. It is recommended to wear goggles when using all pneumatic tools.
The contents of the classification, use methods and precautions of imported pneumatic glue guns have been introduced to friends here. I hope you can seriously understand the above related contents. I believe it will be helpful for you to use the glue gun better. Pneumatic glue guns work by the pressure of the gas. If the pressure is not enough or the air leaks, it will affect the use of pneumatic glue guns, so pay attention to the purchase of imported pneumatic glue guns.
FUXIBIO Ffp2 Respirator manufactured by Careable biotechnology Co.,Ltd
- High filtration Efficiency
- In Chinese PPE Export Whitelist
- CE Certification issued by AENOR NB0099
- Low Breathing Resistance: Flow Rate≥95 L/Min
- Real FFP2 Standard: Test agent in (≤3μm) DOP, Penetration≤6%
- ISO9001 Quality Management System Certificate
Ffp2 Respirator Cup Shape, Ffp2 Face Mask,Ffp2 3D Mask,Ffp2 Mask Online
CAREABLE BIOTECHNOLOGY CO,. LTD , https://www.careablemask.com