First, mobile oil filter product introduction
The mobile oil filter is also called the portable oil filter, the hand-push oil filter, and the mobile oil filter. As shown in the figure below, it has two tires installed at the bottom for easy movement. The bottom design has The oil pan prevents the oil droplets from falling to the ground. This machine can filter and purify various oils such as hydraulic oil and lubricating oil with low viscosity.
Second, the structure of mobile oil filter
The structure of the machine is composed of end cover, filter element, connection, electrical control, oil suction filter, pressure indication, oil pan, gear pump, loadable frame, wheel and so on.
1. End cap: top design, quick opening structure, easy to replace the filter element.
2, filter: select high-precision filter material, large filter area, in line with international advanced level of structural design.
3, connection: all use hydraulic pipe joints, reliable sealing, zero leakage.
4, electrical control: the use of magnetic starter, built-in thermal relay protection, sturdy and durable.
5. Suction filter: Use high-strength preparation net to protect the oil pump.
6. Pressure indication: There is a pressure gauge to indicate the pressure change of the system, reminding the user to replace the filter element.
7. Oil pan: Helps to keep the oil filter machine safe and clean.
8. Gear pump: Internal gear pump reduces mechanical noise, reliable performance and long service life.
9, can carry the frame: sturdy and durable.
10, the wheel: high-quality polyurethane wheels, good wear resistance, stable operation.
Third, mobile oil filter application field
1. Filtration when the hydraulic lubrication system is refueling.
2. Bypass filtration during hydraulic lubrication system operation.
3. The circulating lubrication of the hydraulic lubrication system before it is put into operation.
4. The oil of the hydraulic lubrication system is pumped out without the pump filter of the equipment itself.
Fourth, mobile oil filter technical parameters
model | LYC-A |
preset pressure | 0.6MPa |
Limited Data | 30, 50, 80, 100L/min |
Motor Power | 0.85, 1.1, 1.5, 3Kw |
power supply | 380V, 50Hz |
Filtration accuracy | NASI638 5-7 |
Operating temperature | 0-80 ° C |
Applicable medium | Hydraulic oil, lubricating oil, water-glycol, phosphate ester fuel, etc. |
Volume (mm) | 700×650×960 (1100, 1400) |
Http://news.chinawj.com.cn
Profile Edging,Colored Powder Coated Profile Edging,Aluminium Profile Cabinet Edge,Pvc T Profile Edging
Sinowolf Plastic Dekor Co., Ltd , http://www.sinowolfdekor.com