Chuang Biaofang Textile Machinery Co., Ltd. is a state-owned production enterprise with a 44-year history, talented and powerful modern baler. Turning to the historical picture of this company, "the three of the most" touches everyone's heartstrings. It is the oldest baler manufacturer in China. The factory has been producing balers for 40 years. China's first 1372 baler was introduced in the factory in the early 1960s, creating the production of chemical fiber balers in China. The first. It is China's largest manufacturer of chemical fiber baler series products. At present, the company's baler series products have reached more than 50 varieties, which are sold well all over the country and have been exported to more than 40 countries and regions. It is the manufacturer of the largest capacity baler in China: at the beginning of the new century, the company developed the first new HV809 baler in China, which can be used for an annual production capacity of 30,000 tons. It has created the most history. Filled the domestic gap.
In the era of Great Leap Forward, in the factory with simple conditions, the first generation of spinning machine started from scratch, worked hard, and worked hard to promote the entrepreneurial spirit of ants and bones. After several years of hard work, the 1372 baler was finally developed. Later, Developed and produced A752 medium baler, A761 large baler. From 1966 to 1984, different requirements for packaging of blankets, woolen cloth, sacks, crepe, canvas, waste cotton, etc. have been developed. Different structures of mechanical, electric and hydraulic have been developed, large, medium and small. Packer 32 varieties. Among them, the A761A-360 baler is popular among the users. More than 340 units have been sold all over the country, with an accumulated output value of more than 35.6 million yuan. The FA901 hydraulic small baler designed and developed by the company passed the ministerial appraisal in the early 1980s and won the third prize of the scientific and technological achievements of China Textile Machinery Corporation. The cumulative sales of this product reached more than 27.9 million yuan. With the development of the national “fourth five†and “five-five†period chemical fiber spinning treatment equipment, the S761 and S762 series chemical fiber balers have been developed, which provide excellent equipment for chemical fiber packaging in China.
The reform and opening up has created a good opportunity for the company to develop alternative packaging products. Since 1984, the company has undertaken the task of the first phase of the 15,000-ton polyester production line and the HV803-type baler of the second phase of the national key project. As this project is a national key project, there is a great pressure on the inside and outside of the plant, and the relevant departments are suspicious of whether the textile machine can complete the project. The failure of this supporting project will affect the progress of national key projects, and will also affect the credibility of the enterprise. However, the leading group of the textile machinery company still made the decision to "remember to lose a few pounds of meat and also to win this project." The spinning machine turned the pressure into power and regarded the development of the baler as a "competition machine."
With a weight of 40 tons, the specific gravity of the steel structural parts and the welding process are very difficult. Only the main pressure column is up to 5 meters long, 1.2 meters wide and 2.4 meters high, and the total weight is more than 4 tons. In order to meet the geometric accuracy of each processing surface, the engineers of the factory have considered many practical methods in the selection, alignment, processing and measurement of the reference. A simple power head has been added to the single-arm planer to mill the various machining surfaces and overcome the difficulties of the main pressure column. The main pressure cylinder and the top pressure cylinder are two workpieces of the HV803 type baler. Through the efforts of technicians and workers, breakthroughs have been made in the in-depth processing of the boring grinding and in the processing of the secondary thread. Under the joint efforts of the whole company, the textile machinery has finally produced a high-quality "competition machine", won the honor for the enterprise, filled the gap for the country, and passed the ministerial appraisal. The HV803 chemical fiber baler has reached the international advanced level, meets the needs of national key projects, and replaces it with domestic production. This alone saves more than 3.6 million US dollars in foreign exchange.
In the new product development, the textile machinery company has a focus on introducing, digesting and absorbing foreign advanced technology on the one hand, and bravely exploring and innovating on the other hand, taking the road of self-development. In order to realize electromechanical integration, the company applied the PC control system to the electric control of the baler, developed the YH661 electronic control center, realized the electromechanical integration of the baler series products, obtained the national patent, and was awarded the revitalization of Hebei New Product Award. .
After the company absorbed the advanced technology from abroad, it also designed and distributed FA802, HV804, H1801, H1801A, H1801B and other series of balers. The host control part is controlled by programmable controller, which has flexible programming and convenient detection. It is characterized by high efficiency, safety and reliability, and has been recognized as a national new product by the State Economic and Trade Commission. The HS1802 baler developed by them was listed in the “China Recommended Products for WTO Entry†by the China Council for the Promotion of International Trade and the German Science and Technology Supervision and Evaluation Committee. Among them, the H1801 baler won the growth of China's chemical fiber production capacity jointly issued by the Ministry of Science and Technology and the Ministry of Foreign Trade and Economic Cooperation. In order to meet the market demand and adapt to the development needs of chemical fiber manufacturers, the company has increased the development of new products. Further develop the baler market and continuously improve the technical level of balers. At the beginning of the new century, we have developed the HV809 model with an annual output of 30,000 tons of Panlun short fiber balers, which fills the blank of domestic large-capacity balers.
The machine is popular among users for its large output, fast speed and large packaging. The machine absorbs the advanced technology of similar products at home and abroad, and adopts advanced man-machine dialogue and servo positioning control system for the first time on the baler to improve the packaging production. Ability to meet the needs of chemical fiber manufacturers.
Liu Jiebo, Chairman and General Manager of Yanfang Machinery Co., Ltd. told the author: The process of developing the baler series products of our company is full of the hard work of the employees of the whole factory. The result of each research is the wisdom flower of the whole factory staff. It is the fruit of unity and hard work, not afraid of hardships. The victory of technical research reflects the talent strength and technical equipment strength of the development and production of balers, and we will deliver more exquisite products according to the needs of users to meet market demand, so that enterprises can be invincible and strive to create beautiful. s future.
C Zheng Gui Zeng Anlun Yang Guozhu) A new type of environmentally friendly material, plastic-wood composite material, was put into mass production in Shenyang Woerde Composite Materials Co., Ltd.
Shenyang Woerde Composite Materials Co., Ltd., located in Shenyang Economic and Technological Development Zone, is a Sino-Canadian joint venture with a total investment of 500 million yuan, of which the first phase investment is 100 million yuan. The factory covers an area of ​​50,000 square meters. The first phase of the project deals with 15,000 tons of various waste plastics and 18,000 tons of agricultural waste. The annual output of various specifications of plastic wood is 30,000 tons, plastic wood pallets are 400,000, and the annual output value is 160 million. Yuan Renminbi. At present, the company's products have been tested by the China Packaging Research and Testing Center, seven tests including impact test, bending test and static load dynamic load. The physical and chemical indicators are all in line with national standards. The products have been exported to the United States, Canada, Hong Kong and other regions. Sold to Guangdong Petrochemical, Maoming Petrochemical and other companies, the products are highly praised by industry experts and customers.
On the first anniversary of the establishment of Shenyang Woerde Composites Co., Ltd., the reporter was fortunate to interview Mr. Zhang Yefeng, the chairman and general manager of the company. General Zhang introduced: In recent years, the construction of ecological environment is one of the most important issues facing us human beings. Due to over-exploitation, the vegetation is beneficial to desertification and desertification, and “dust storms†often patronize us. Problems such as a serious shortage of timber resources, serious environmental pollution, lack of water resources, and increasing white garbage have threatened people's bottom-up environment. The work of protecting the environment of the J household has attracted the attention of the state and society. Because of this, the decision-making level of Shenyang Woerde Composite Materials Co., Ltd. decided to launch the environmental protection project for the benefit of the country and the people.
According to relevant information, China produces 5 million tons of various plastic products every year, some of which use plastics and building plastics for a short period of time, which in turn generates a large amount of waste materials. People often produce a large number of "garbage bags" in their daily lives. The white garbage produced by waste plastics has become a kind of "public hazard" that threatens the urban environment. Batches of white garbage cannot be disposed of.
How to deal with these wastes has become the focus of attention at all levels of government. To this end, the country has also issued relevant policies on the use of waste materials. High value-added wood-based products are produced using 90% of waste that cannot be processed in batches (white waste). It not only protects the ecological environment, saves wood, and saves resources, but also has far-reaching social and ecological benefits, and it also brings considerable economic benefits to the enterprise. In economically developed countries, the same production and reduction of resource consumption is called a “win-win†strategy.
Before approaching the factory, first of all, I saw the name of "Shenyang Woerde Composite Materials Co., Ltd." inscribed by Wang Guangying, the deputy committee chairman of the Standing Committee of the National People's Congress. Entering the factory area, we saw a grassy garden factory, a modern office building, first-class office facilities, a first-class scientific researcher and a manager, a spacious, bright, clean and tidy modern assembly line.
Who can think of this as a modern factory that handles 30,000 tons of various wastes a year. Mr. Zhang told us that all the technology and equipment were imported from Canada, and the mixing equipment and extrusion equipment were all computer controlled. At present, Shenyang Woerde Composite Materials Co., Ltd. has become the largest plastic wood material manufacturer in Asia, the largest plastic wood pallet processing enterprise, and the largest waste plastic (white garbage) and agricultural waste processing enterprise.
Wood-plastic materials have been widely used in Europe and North America and are widely used in various fields. It is based on polymer theory and uses a special extrusion process. The material itself has a new type of bad protection material with the advantages of wood and plastic.
Because of its excellent characteristics, wide source of raw materials, low production costs, and environmental protection requirements that meet people's benefits, it has become the preferred substitute for wood and plastics in North America and has become a packaging industry. Replacement products. In particular, after China joined WT0, the logistics industry is in a good position, and the emergence of such products will provide strong support for the development of the logistics industry.
As we all know, industrial enterprises and foreign trade enterprises require a large number of wooden pallets and wooden packaging products every year. China's logistics industry is on the rise. Due to the continuous development of the enterprise and the pursuit of high efficiency, it is necessary to increase the size of the big bat.
Zhejiang Changxing Senda Bamboo & Wood Products Co.,Ltd , https://www.sendaflooring.com