A detailed analysis of the causes of the failure of two kinds of conveyor chain plates in the current food and industrial production, the use of conveyor chain plate is one of the most common accessories. The use of industrial chains is most common in the production and transportation of food, and the conveyor chain plates are mostly used in an assembly line method. They have a wide range of applications and high frequency of use. They are intended for long-term high-intensity use and often cause wear problems. If coupled with the improper use of the method, it will cause great damage to the conveyor chain. Today Xiao Bian took his friends to understand the causes of the failure of the conveyor chain.
First, the wear of the conveyor chain caused the chain to fail. The raw material of the chain was poor and the operation of the workers was inappropriate. The most simple parts of the chain that show wear are the sprocket and the pin. These two parts exhibit wear mainly because of the lack of partial smoothness. Therefore, in order to avoid the onset of this appearance, the operator should pay attention to always look at the smooth effect, add smooth oil in time, and check whether there is abrasive in the smooth oil or change the smooth method.
After the sprocket is slightly worn out, the sprocket can be reversed, with the lighter-wearing side facing the chain. In addition, if the use of poor environment may be smooth and poor sealing, it will cause the hinge to wear, once the chain hinge wear and tear, chain lengths become longer, the simple operation may cause the jumping teeth may be off the chain, reducing the chain life, speed up the chain failure.
Second, the failure caused by the exhaustion of the conveyor chain As far as the machinery and equipment are concerned, most factories are basically producing 24 hours of continuous operation, so this will lead to the exhaustion of the actual use of the equipment. Conveyor chain plates are often over-used, exhibiting exhaustion failures and malfunctions, which means that the chains are subjected to excessive loads during the course of operation, resulting in non-uniform forces and simply presenting cracking or kneading. Under normal conditions, it is only handled by strengthening the parts.
Through the understanding of the actual operation principle and the operation process of the conveyor chain plate, we have found that there are two main manifestations of the epidemic of the conveyor chain plate: one is the failure due to wear and the other is the failure caused by fatigue.
First, the wear of the conveyor chain caused the chain to fail. The raw material of the chain was poor and the operation of the workers was inappropriate. The most simple parts of the chain that show wear are the sprocket and the pin. These two parts exhibit wear mainly because of the lack of partial smoothness. Therefore, in order to avoid the onset of this appearance, the operator should pay attention to always look at the smooth effect, add smooth oil in time, and check whether there is abrasive in the smooth oil or change the smooth method.
After the sprocket is slightly worn out, the sprocket can be reversed, with the lighter-wearing side facing the chain. In addition, if the use of poor environment may be smooth and poor sealing, it will cause the hinge to wear, once the chain hinge wear and tear, chain lengths become longer, the simple operation may cause the jumping teeth may be off the chain, reducing the chain life, speed up the chain failure.
Second, the failure caused by the exhaustion of the conveyor chain As far as the machinery and equipment are concerned, most factories are basically producing 24 hours of continuous operation, so this will lead to the exhaustion of the actual use of the equipment. Conveyor chain plates are often over-used, exhibiting exhaustion failures and malfunctions, which means that the chains are subjected to excessive loads during the course of operation, resulting in non-uniform forces and simply presenting cracking or kneading. Under normal conditions, it is only handled by strengthening the parts.
Through the understanding of the actual operation principle and the operation process of the conveyor chain plate, we have found that there are two main manifestations of the epidemic of the conveyor chain plate: one is the failure due to wear and the other is the failure caused by fatigue.
Poly Solar Panels,Solar Energy Panel,Solar Power Panel,Solar Panels With Ce
ZHONGWEI CITY YINYANG NEW ENERGY , https://www.yinyangnewenergy.com