The application of sensors in the manufacture of electronic tensile machines: In the manufacture of electronic tensile machines and other mechanical manufacturing, sensor technology is an important part of testing and automatic control. In the mechanical manufacturing test system, it is used as a primary instrument positioning, and its main feature is that it can accurately transmit and detect a certain form of information and convert it into another form of information. Specifically, the sensor refers to a component or device that has a feeling (or response) and a detection function for a certain information of the object to be measured, and converts it into an output signal corresponding thereto according to a certain rule. Without accurate and reliable capture and conversion of the original information being measured, all accurate testing and control will not be possible; even the most modern electronic computers have no accurate information (or convert reliable data), no distortion Input will also not fully play its due role.
It is understood that in the application of electronic tensile machine manufacturing, the main characteristics of high-quality sensors are: long life, high reliability, strong anti-interference ability; meet the accuracy and speed requirements; easy to use and maintain, suitable for machine tool operating environment; low cost Easy to connect with a computer. Sensing technology for the cutting process and machine operation The sensing process of the cutting process aims to optimize the productivity of the cutting process, the manufacturing cost or the resection rate of the (metal) material. The target of sensing in the cutting process is the cutting force and its change during the cutting process, the chattering during the cutting process, the contact between the tool and the workpiece, the state of the chip during cutting and the identification of the cutting process. The most important sensing parameters are cutting force. Vibration during cutting, acoustic emission during cutting, power of motor during cutting, etc. For the operation of the machine tool, the main sensing targets include drive system, bearing and swing system, temperature monitoring and control, and safety. The sensing parameters include machine downtime and surface roughness of the workpiece. And processing accuracy, power, machine state and flow rate of cooling lubricant.
Concerned about surprises
Label: Application of sensor in the manufacture of electronic tension machine
Previous: Introduction of medical equipment ultrasonic cleaning machine Next: How to prevent plastic door and window hardware damage
Magnetic switch is used to probe the door, window and drawer if opened illegally or mobile. It is composed of two parts: a wireless transmitter and a magnetic block.The magnet and the dry reed pipe are respectively arranged in the door frame (window frame) and the door leaf (window sash), which are basically embedded and installed.Magnetic switch including Door magnetic switch and Wordrobe Magnetic switch. Door magnetic switch: The preinstall Gallery lights will turn on while open door. Wordrobe Magnetic switch: The wordrobe light will turn on while open wardrobe.
Door magnetic switch
Wordrobe Magnetic switch
Smart Hotel Magnetic Switch,Open Door Contact Switch Magnetic,Magnetic Door Contact Switch
Shenzhen Zhuohao Intelligent Electronic Development Co., Ltd. , https://www.szactop-smart.com