How to choose an automatic door brand that is suitable for your own use?
Because China does not have the relevant national standards for automatic doors, automatic door grades and quality are uneven. If you have not used automatic doors, it is best to choose an automatic door brand that is produced by a professional factory and can provide a complete after-sales service. (There are a lot of automatic door brands that are made up of some trading companies buying spare parts and assembling them by themselves. Try to avoid buying such products.) Do not think that all the samples are foreign languages. If the materials are also foreign language products, they are imported goods. In fact, this is a violation of state regulations. Really well-known brands, legal goods will not do so.
When purchasing an automatic door, it is advisable to purchase it at a designated dealer authorized by the automatic door or in the store where the authorized store is authorized (with a power of attorney suspended). At the time of purchase, it is necessary to clarify the basic configuration of the purchased equipment and prevent the buyer from deducting the parts.
How to determine the function configuration of the automatic door according to your own requirements
Different brands of automatic doors, the standard configuration is also different, after the selection of the automatic door brand and determine its basic configuration, and then according to the requirements of use, determine the need to add additional features. Its content is usually as follows:
Do you need to configure high-performance sensors (large-range, high-sensitivity; such as five-star hotels, office buildings) or narrow-area sensors (such as banks and shops along sidewalks);
Is it necessary to configure safety auxiliary sensors to ensure that no accidental accidents will occur under any circumstances (especially five-star hotels, hospitals)?
Do you need to install electric locks and special door opening methods (such as swiping cards, passwords, fingerprints, remote control, video intercom, manual control)?
Do you need to configure such systems as fire linkage and backup power supply?
How to choose the decorative type of the post, door, and door
Generally speaking, from the perspective of cooperating with the image of the automatic door and facilitating the maintenance and repair of the automatic door, it is best to use stainless steel, aluminum or aluminum-plastic plate as the exterior surface of the door post and the door sill; if marble is used as the outer surface A mutual construction plan must be established in advance between the automatic door project and the marble project, otherwise serious consequences will result. The production of the door body is generally glass-based (except for hospitals). At present, there are common glass doors, upper and lower door clip-type frameless doors and framed glass doors. The production cost of the pure glass door is lower, and the permeability is better; the upper and lower door clamp type frameless doors have better safety angle than the pure glass type; the production cost of the framed glass door is high, and it is stable, atmospheric, safe and reliable. Sealing greatly improved. . Therefore, when the door opening is small, a pure glass door or a top-bottom door clamp is generally used. When the door hole is large, a framed glass door is generally used.
How to choose a professional installation company with strength and rich experience to carry out construction
Because the automatic door installation has the characteristics of “easy to learn and hard to learnâ€, and there is no rich experience in installation, automatic doors often have defects of one kind or another, and they are often difficult to eliminate. It is also difficult to guarantee perfect after-sales services.
How to Accept the Automatic Door Project
Automatic door profile door frames and accessories, induction equipment and glass varieties, specifications must meet the design requirements and the current state of the relevant quality standards.
The connection of the door member must be firm and the structure has enough strength and rigidity to ensure the door is open and closed sensitively. The position of the automatic door frame, door beam guide rail and lower rail shall be correct, firm and reliable. The installation position, connection method and opening direction of the sensor equipment, and the detection range of the detector must meet the design requirements and corresponding industry standards. Doors and optional parts, accessories materials, in addition to stainless steel or corrosion-resistant materials must be rust-proof, anti-corrosion treatment. Contact corrosion of aluminum alloy profiles is strictly prohibited.
Inspection method: visual inspection.
The appearance quality of automatic doors should meet the following requirements.
Qualified: No damage on the surface and defects affecting performance. Local scratching and scratching shall comply with the requirements of the corresponding standards. There shall be no obvious color difference on the colored surface of adjacent components of the door. The surface of the door may not contain metal shavings, burrs, corrosive marks, or other stains. Traces, uniform gaps between the fan and the frame.
Excellent: The surface is free from damage and affects the performance of the defect, no scratches, scratches, the adjacent surface of the door member uniform color, chamfer smooth, smooth. The door surface is free of metal shavings, burrs, corrosive marks and other stains, no waveform refraction, and the gap between the fan and the frame is uniform.
Automatic door attachment installation should meet the following requirements:
Qualified: The installation location is correct, complete, and firm, playing their own role, with sufficient strength, flexible opening and closing, and no pollution.
Excellent: The installation location is correct, complete, firm, upright, play their own role, with sufficient strength, flexible opening and closing, clean, beautiful and pollution-free.
Automatic door coating glass glue should meet the following requirements:
Qualification: The surface of the glass glue joint is smooth, there is no obvious mark on the joint, and there is no pollution at the glue joint.
Excellent: The surface of the glass glue joint is smooth, smooth, and there is no trace on the joint. The seam is clean and free from pollution.
Inspection method: visual inspection.
Also use stainless steel as the outer frame of the door frame, why the effect is not the same as the stainless steel door frame outer surface, must use stainless steel thickness of 1.2mm or more, otherwise there will be different shades of light and dark, very ugly.
How the owner maintains the automatic door
Because of the installation quality or the use of the environment, automatic doors will inevitably cause problems during the operation and need to be adjusted. Please contact the relevant company. However, it is hoped that the owner can clean the dust in the automatic door cabinet quarterly. When an abnormal sound or malfunction occurs, call the relevant company in time.
Wardrobe brand water heater brand glass stainless steel marble aluminum decoration stainless steel glass door glass door
2 Person Hot Tub
2 Person Hot Tub,small outdoor spa tubs,backyard hottub,outdoor whirlpool hot tub,outdoor jacuzzi hot tubs
Guangzhou Aijingsi Sanitary Products Co.,Ltd , https://www.infinityedgehottub.com