Cleaning of kitchen hardware:
1. Just rinse the faucet with water, then dry the faucet with a soft cotton cloth.
2. Use the following cleaning agents to remove the rough mask and deposits: mild liquid glass cleaner, pure liquid glass cleaner, acid-free, non-abrasive soft liquid or completely dissolved powder, frictionless solution polish .
3. Do not use any abrasive cleaners, cloth or paper cloth; do not use any acid-containing cleaners, polishing abrasives or rough cleaners.
4. In the case that the water pressure is not lower than 0.02mpa (ie 0.2kgf/cm2), after using for a period of time, if the amount of water is found to decrease, or even the water heater is turned off, it can be at the outlet of the faucet. Gently screw it.
Concerned about surprises
Label: How to clean kitchen hardware in winter
Previous: Sanitary hardware hanging daily cleaning skills Next: For home decoration, draw your best to teach you how to buy furniture door pull
China Flat Bar Punching Machine Suppliers
CNC Hydraulic Flat Bar Punching, Marking, shearing machine
CNC hydraulic punching machine for striped steel,
CNC hydraulic punching machine for plate
Used for punch and mark of joint plate in the field of iron tower. It is also used to punch and mark metal plate.
Bar Cutting Machine,Flat Bar Cutting Machine, Flat bar cutter ,Cnc Flat Bar Punch Machine
Shandong EN FIN CNC Machinery Co., Ltd , https://www.shuofangcn.com